wtb tensioner

[barettabob]

I was changing sc pullies and putting belt back on when,snap,the tensioner broke,I have the single bolt tensioner and a 8 rib kit for my vortech.anyone have one laying around??

 

[ThePope]

I have one. What year car does it need to be off of. Mines from a 2002 GT

 

[barettabob]

mines a 2000 gt

 

[ThePope]

Ok, so thats the one you need.

 

[barettabob]

yeah its the single bolt,not the 3 bolt bracket

 

[ThePope]

Ok, if you want it, make me an offer.

 

[barettabob]

shoot me a pic samboraxxx2@aol.com

 

[leftySVT281]

I was changing sc pullies and putting belt back on when,snap,the tensioner broke,I have the single bolt tensioner and a 8 rib kit for my vortech.anyone have one laying around??

If you still need this I have one..

 

[barettabob]

If you still need this I have one..

yeah,I still do need one,how hard is it to drill out,tap the cover and block so you can install the new one?

 

[leftySVT281]

yeah,I still do need one,how hard is it to drill out,tap the cover and block so you can install the new one?

I've never tapped one out but I'd say be carefull you don't wanna drill through the covers and have to get a new one.Why do you have to tap out for a new one??

 

[barettabob]

if you look close at the pic I posted,the crap pot metal sleeve that is at the cover snapped flush

 

[leftySVT281]

if you look close at the pic I posted,the crap pot metal sleeve that is at the cover snapped flush

I'm not possitive but you might have to change out the Cam Cover, on the tensioner I have it has a stud pin and the bolt that holds in place I'm thinkin you popped the tensioner off of the cam cover so if you want to replace it you have to drill one hole and one tapped hole can't you repair the existing holes and just replace the tensioner

 

[barettabob]

call me 585-208-7024 or shoot me your #,easier to talk in real time
Bob