wire hiding

[svtnotch]

Free winter mod even got the zipties for free. Didnt need to extend any wires. Wires were ran threw existing opening and under splashshield. Last pic is not my car its what i want to do to my engine bay. Before and after.

 

[svtnotch]

 

[svtnotch]

Location of existing hole where wires were ran.

 

[EHA Racing]

I just did the same thing with my brother's car.

 

[1BIGMOFO]

Nice engine bay = sexy!!!

GL with the project!

 

[svtnotch]

Lets see if i can hit any football squares so i can buy some 5.0 parts. Only bought two i have colts 9 saints 3 and colts 3 saints 6. $1000 for final

 

[svtnotch]

I was mistaken in my earlier post. I did need to extend a wire the one from solenoid to starter was 10 in to short. Heres another pic from below. Im going to go to the junkyard and find some kind of rubber boot to wrap everything in. Something like the 5.0 dizzy rubber boot. I dont drive it in rain and itll be hidden under splashshield.

 

[-MAVERICK-]

such a simple thing makes a world of difference

 

[jkstang78]

I did the samething on my other mustang.

http://www.cardomain.com/ride/405745/5

I did it a little different I took m fender off to do it. But I do have other pics in the link above

 

[-MAVERICK-]

im doing this over the weekend for sure!

 

[1990_LX]

Looks good!

 

[svtnotch]

JK thats where i wouldve mounted my solenoid if i didnt keep my windshield washer res. Ill add another tip for anyone doing this. I had to reroute the harness behind radiator (light harness) to get more length so i didnt need to extend any wires.

 

[-MAVERICK-]

im 90 percent done doing this its been somewhat easy and you have plenty of room to hide evrything behind the fender with out it showing. took me a couple of hours. and some beers

 

[BKD]

THAT LOOKS SWEET......

 

[svtnotch]

Hide your hood cable while you have it apart. You can see which route i took in pic above.