Turn signal/socket problem

[TC713]

So I was installing my sequential taillights today and upon testing the first side (passenger) I did, I noticed I had a burned out bulb on the driver side (I had not touched this side yet). So I replaced the bulb, and it still does not light.

It's the inner socket right above the reverse light. Any ideas?
Could it be a fuse, or would they all not light?

 

[RideThePony2004]

it could be a fuse because i think they run separately. I installed sequentials on mine too

 

[TC713]

Update:

Just for sh!ts and giggles I hooked up the sequential module to the driver side just to see if by some chance it would bypass the problem.....well, it did. The bulb lights.

Still makes me wonder what the heck it was.....maybe a bad relay? I don't know.

The car gods were good to me for a change.

 

[PDRob77]

Update:

Just for sh!ts and giggles I hooked up the sequential module to the driver side just to see if by some chance it would bypass the problem.....well, it did. The bulb lights.

Still makes me wonder what the heck it was.....maybe a bad relay? I don't know.

The car gods were good to me for a change.

Lol couldve been a bad relay but hey who cares since it works now

 

[Starless]

The inner bulb does not come on with the turn signals or breaks in stock configuration.

 

[TC713]

Lol couldve been a bad relay but hey who cares since it works now

EXACTLY!! lol