Rear disc conversion questions
- Thread starter toomanytoys
- Start date
I do not think so. I think the rotors for the TC are a smaller diameter. You probably could get the caliper to line up right with some spacers, but I do not think the diameter is correct.
Too easy to get some axles from a junk yard though, and rotors from the part store.
Skimpin on stuff like brakes is never a good idea.
Too easy to get some axles from a junk yard though, and rotors from the part store.
Skimpin on stuff like brakes is never a good idea.
I see that the coupes rotors are 10.75 in and the gt's are 11.25. So thats a quarter inch on each side. I might be able to section the brackets down but swapping axles is out . I have a Detroit Tru Trac with 31 spline Strange forged axles and c-clip eliminators not to mention 2 sets of wheels.
When you talk about spacers, where would they go? Under the rotor ? Due to the eliminators my axles stick out 3/8 of an inch on both sides
When you talk about spacers, where would they go? Under the rotor ? Due to the eliminators my axles stick out 3/8 of an inch on both sides