question on pricing

[Andrew1021]

how much would it be for a cam install with phasers and 3000 stall?

 

[06LLGT]

I'm sure this question has been asked before Andrew.
Use the search feature and you will find a ton of anwsers

 

[Quick281]

cam install shouldnt be more than $400. but that all depends on what the shops get per hour. realisticly its a 3.5 hour job start to finish.

 

[06LLGT]

cam install shouldnt be more than $400. but that all depends on what the shops get per hour. realisticly its a 3.5 hour job start to finish.

It depends on which cams he is getting.
NSR(no springs required), just pop old ones out put new in.
SPR(springs and phasers required), that will take awhile, and get costly. easily 700+

 

[Quick281]

he wants cams like mine.. nsr. easy easy easy

 

[06LLGT]

Good choice.
Andrew, what cams are you going to get? And do you care more about the sound or more about performance?
If you want the best performance from a NSR cam, go with Comp Cams NSR Stage II. I did my research and talked to a very knowledgeable source(US-1) on s197forum and these are the best NSR you can get.

 

[Quick281]

Good choice.
Andrew, what cams are you going to get? And do you care more about the sound or more about performance?
If you want the best performance from a NSR cam, go with Comp Cams NSR Stage II. I did my research and talked to a very knowledgeable source(US-1) on s197forum and these are the best NSR you can get.

+1. with those cams you'll probably pick up around 45 +/- rwhp. the thumprs gave me 24, but it sounds like a 10 sec car

 

[MineralGray02K]

Just a reminder this is Mustang Magic's section.