Professional Products...

[Calypso]

Does anyone have any input on the professional products stuff... I am looking to purchase an upper and lower intake and tb... would like to go the polished route if the quality is compareable to others big name intakes

 

[AdirondackFox08]

Well the professional products typhoon intake is a copy of the Edelbrock performer, with the exception that maybe the intake runners need to be cleaned up a little bit. I'm not sure about their throttle bodies though, you can take a look at the TFS throttle bodies on summit racing, I would think they are good quality, one of the cheaper ones anyhow. I wouldn't go with a bbk tb though, they whistle and some people have said that one of the screws on the tb came off and went into their motor.

 

[Calypso]

I couldnt find alot of reviews on the Professional Products stuff, so I am just going to take the Trick Flow route...

 

[MaximumRisk]

they will make power, the only downside that most find (including me) is that the ports were a little rough and could use a little cleaning up, but they do work very very well

 

[ksteversn95]

i used the intake elbow for sn95 conversion. JUNK

 

[fordgasm]

i have one of their t bodys and lower they are pretty good for me. and a adj.. fuel reg pretty good stuff from my experience

 

[Street bandit]

I'm using their fuel rails in one of my cars.

 

[dsblk93gt]

The intakes are not bad, like mentioned a little bit of port work to clean up cast flashing may be needed. To be honest my cousin bought the expensive RPM II Edelbrock and I was not impressed with the exterior of it. A friend of mine had the polished PP intake and the matching TB and it looked good and worked fine. For the price if you want polished it is one of the only options.

 

[Calypso]

The intakes are not bad, like mentioned a little bit of port work to clean up cast flashing may be needed. To be honest my cousin bought the expensive RPM II Edelbrock and I was not impressed with the exterior of it. A friend of mine had the polished PP intake and the matching TB and it looked good and worked fine. For the price if you want polished it is one of the only options.

I just came across a trick flow heat track intake with a 75mm bbk tb for 350 plus shipping... i was surprised by the pics at just how excellant the shape was on this... not a scratch on the upper... i guess it never hurts to look on craigs list outside of ny... now on to picking up some heads