Need some help! Can anyone somewhat close to me help a buddy out?!

[dsblk93gt]

Thats a good meter, looks like the AFM/PMAS Velocity. I noticed the valve cover breather and that the line from the TB to the valve cover is gone as well. What else is done to the PCV system?

 

[TERROR]

put a carb on it

 

[dsblk93gt]

Everything looks fine from here. Try turning the MAF the other way so that the sensor is on the opposite side.
Do you have anyone near you that could lend you their stock MAF so you can try it out?

Also, the car not been tuned is not helping you either. When I first put heads, cam, intake in my car, it would not idle at all.

It just has an E303 though, pretty mild cam be shouldn't be having that bad of issues.

 

[dsblk93gt]

How does the cap/rotor look too?
With the IAC unplugged does the car die or stay running but roughly?

 

[W2BSTANGMAN]

With the IAC unplugged it runs but rough...Cap and rotor look good...I don't really know anyone close to me as I just recently moved to NY...That's what sucks about this! So relying on typing really has it's disadvantages sometimes! But I think we'll get it figured out. So, how would I go about getting the car tuned?? Anyone have a chip they could burn and sell me or a tuner to help out with that??(Never really used a tuner or a PMS before) Just let me know! Thanks again guys

 

[dsblk93gt]

With the IAC unplugged it runs but rough...Cap and rotor look good...I don't really know anyone close to me as I just recently moved to NY...That's what sucks about this! So relying on typing really has it's disadvantages sometimes! But I think we'll get it figured out. So, how would I go about getting the car tuned?? Anyone have a chip they could burn and sell me or a tuner to help out with that??(Never really used a tuner or a PMS before) Just let me know! Thanks again guys

Id rather the car in front of me, but so far so good with doing chips from a distance. If you had a wideband it would be nice, but not a killer to the whole deal. PM me if you want.

 

[W2BSTANGMAN]

dsblk93gt...You have PM.

 

[vorstang]

on some cars with a aftermarket maf, if you run a breather in place of the oil cap it will make the car's idle quality go bad. i was told it's kinda like a controlled vacuum leak. try putting the stock oil cap back on

 

[MaximumRisk]

^^^that's right!. If you are still running a PCV valve , a breather on the valve cover becomes a vacuum leak. You can put the stock oil cap back on, as suggested by vorstang or disconnect the hose that goes from the intake to the PCV valve and cap it.
See if that helps

 

[W2BSTANGMAN]

Thanks for the suggestion guys! Unfortunately, the car had this done to it already when I purchased it ...So I'll have to go down to my parts store and pick one up tonite!...I'll let you guys know if it makes any difference!

 

[MaximumRisk]

If you don't have an oil cap just remove the vacuum hose from the PVC valve and plug it (you can use a bolt to do so)

 

[W2BSTANGMAN]

Sounds good! I'll get to it rite after work.