Need assitance installing HID Kit

[edricjames]

I need some assistance here installing the H13 bi-xenon kit.

I installed the kit and wired everything correctly but there is one small issue. I turn my headlamps on to low beam and the lights are operating on high beam mode. I turn lamps on to high beam and the lights are operating on low beam mode. What could the issue be? I tripled checked all the wiring to make sure I plugged in everything correctly and I am positive I did. I looked on the HIDGUY.NET website and there is no support for this issue I am having. All help is appreciated.

 

[Oscar@HIDGuy.net]

I need some assistance here installing the H13 bi-xenon kit.

I installed the kit and wired everything correctly but there is one small issue. I turn my headlamps on to low beam and the lights are operating on high beam mode. I turn lamps on to high beam and the lights are operating on low beam mode. What could the issue be? I tripled checked all the wiring to make sure I plugged in everything correctly and I am positive I did. I looked on the HIDGUY.NET website and there is no support for this issue I am having. All help is appreciated.

Make sure you check the harnessing on the relay harness. Look at this for reference.

H13 / 9008 Bi-xenon Wiring Harness Pin Location - Correct Color Diagram [H13 / 9008 Bi-Xen Wiring Diagram] - $0.00 : HID Kit and Aftermarket car Lighting specialist-HIDGuy.Net

 

[edricjames]

thanks for the updated info. I ended up swapping 2 wires off one of the factory headlamp harness that was used. (swapped left most and right most wire positions)