My 2.5yr project.LOL
- Thread starter Tokyoke
- Start date
Ok just got back today from my friends. I finished prepping all the rust in and aound the engine bay. This fri he is going to start to primer it then bondo it.
I also added the correct longer bolts to my front A- Arms. i had the stock ones in and u could only get 4-5 threads of the nut onto it..eeeek. i also sandblasted one turbo header and ceramic coated it black. this was a test trial.. and it worked out great. we have base numbers off the headers, downpipe and the turbine housing when we had the car running a few months ago.
ill see how temps have dropped after the coating.
ok here is the header in the over warming up after being sandblasted(it was 27 in the garage.
And here it is all coated with Techline turbo x coating. this stuff goes a long way. we filled the mini touch up gun about half full. tested spray patterns on cardboard a bit to get a feel of the gun then we coated the header. nice coat on it. we still had tons left .
I also added the correct longer bolts to my front A- Arms. i had the stock ones in and u could only get 4-5 threads of the nut onto it..eeeek. i also sandblasted one turbo header and ceramic coated it black. this was a test trial.. and it worked out great. we have base numbers off the headers, downpipe and the turbine housing when we had the car running a few months ago.
ill see how temps have dropped after the coating.
ok here is the header in the over warming up after being sandblasted(it was 27 in the garage.
And here it is all coated with Techline turbo x coating. this stuff goes a long way. we filled the mini touch up gun about half full. tested spray patterns on cardboard a bit to get a feel of the gun then we coated the header. nice coat on it. we still had tons left .
Last edited:
genius!!Hes located i belive in Cali..
http://www.rpm-mustangs.com/
I plan to see if that is the bov when the cars back together again.. Dual DSM 1st gen bov's
The headers and cross over have been coated in Techlines Turbo X ceramic coating. all pipes and the turbine hosuing will be coated with this.
Here is the cross over pipe. u can see the wastegate is being refed back into the exhaust.
The flash from the camera dulled the actual color. its very dark black.
And finally the engines back in somewhat.
Here is the cross over pipe. u can see the wastegate is being refed back into the exhaust.
The flash from the camera dulled the actual color. its very dark black.
And finally the engines back in somewhat.
