My 2.5yr project.LOL

[Tokyoke]

So my friend who welds and me have been working on my car for almost 3yrs. I was in no rush but its finally finished and we took it for a short 10 min drive.

Now we are prepping the engine bay to paint it..

The intercooler

feeding into the intercooler.

3'' tubing going from intercooler to the TB.

bumper support cut to fit the Intercooler, Also the rust of NY.

 

[Tokyoke]

the exhaust comming from the engine bay.

exhaust dumped at the axle.

the new MM CC Plates

pic of engine bay prep and the built in battery.

Pics of the car just before we test drove it.

Final picture pipes are not yet coated that will be when the engine goes back in after the engine bay painting.

 

[Tokyoke]

Did the whole turbo setup ..injectors, and maf for just under 2200

 

[EHA Racing]

Looks really good! Nice Job!!

 

[mustangfan]

Looking good guys. Keep up the good work.

 

[Wicked One]

shweeet man. Great job, gonna be killer when all done.

 

[Tokyoke]

Thanks guys. I hope so. I get nervous when redoing everything. My old setup with my procharger maxed out my 42's my focus 300lph fuel pump and maf at 10psi and only 5500rpms. Ive upgraded to 60lb inj and the new 05 style aftermarket maf sensor. Also ran thicker gauge wire from the fusebox in the engine compartment to the fuel pump to allow more stable votage to run to the pump.

 

[NYstang]

nice! what you going to run boost wise?

dont forget the hyper-youcrapedit pistons!

 

[Tokyoke]

nice! what you going to run boost wise?

dont forget the hyper-youcrapedit pistons!

14.5psi. its a fully built engine,9.0.1 compression i wish i went 8.8.1 so i can run lil more boost but this will now be my DD maybe track a few times a year. forged rods, forged pistons, 1.73 RR, Custom cam(old set up grind) Ported heads, ported intakes, Accufab 65mm Tb,and a forged Sc crank.

8.8 rear end with stock 3.27 gears(i have 3.55 i need to get put in) cobra front brakes 13in, Mach 1 wheels , performance automatic valve body and stock TC. Adjustable front shocks and roush v6 springs for the front and back

 

[NYstang]

Sounds a lot like the setup I was considering! except I ended up doign a body makeover rather then an engine rebuild(yeah, stupid)

forged 3.8, 4.2, or 4.3?

 

[Tokyoke]

3.8. i was debating the 4.2/4.3 but at the time everyone on the other board was going 4.2 so i had to be different and see what i could do with the 3.8

 

[NYstang]

4.2 is better torque though!

Derricks car made 320/420...mmm, sexy torque :drool:. now with more engine and more boost!

but he's M112'd, not turbo.

 

[EHA Racing]

Do you have a relay on your fuel pump? It will run much harder and with less heat if you have a 30amp relay on it.

 

[Tokyoke]

Do you have a relay on your fuel pump? It will run much harder and with less heat if you have a 30amp relay on it.

running a 50 amp inline fuse and a 30 amp relay i was trying to find my pictures

 

[MineralGray02K]

That is SICK!!! Great work, can't wait to see more pictures

 

[BoostedStg02]

Nice, What kind of power were you making with the Procharger before you maxed out your injectors. I have 42lbers and I was just wondering how high I could go with them.

 

[Tokyoke]

well @10psi i saw 320. i was at 12 when i maxed everything this was on a 15psi pulley i honestly dont knw what i made at 12psi we didnt keep that dyno since we had to bring it down 200-300rpm to keep it safe.. most of the time anyweres from 350 rwhp-400rwhp on v6 will be the cut out for 42's

 

[Tokyoke]

foregot i had this..

 

[PrjctLxEnvy]

sweet build dude, keep up the good work.

 

[mustangfan]

Sounding good guys.