More damn steering problems

[wyldhog77]

I'm still farting around with the damn Grant wheel. My newest problem is that the threads on the shaft are messed up and naturally I don't have a rethreading dye to fit. Is there any chance someone out here in forum land knows what size dye I would need? All the research I've done, and I can't find the thread size. Thanks in advance.

 

[caseys72sprint]

you can go to napa and purchace a thread file,it will have 8 different thread pitches.fairly cheap.hope this helps.casey

 

[Wicked One]

Or just drill it out and use 1 size larger bolt and tap it to that.

Or yet, get a helicoil and repair the threads.

 

[Cobra Esq]

Bring your wheel with you, have them measure the threads with a bolt or a tap

 

[Mike65]

Or just drill it out and use 1 size larger bolt and tap it to that.

Or yet, get a helicoil and repair the threads.

A heli coil or a tap wont work he needs a die to fix it, he states the threads on the steering shaft are messed up. Bring the old steering wheel bolt to a parts store & have them match up a die for you so you can fix the threads.

 

[Wicked One]

Ha ha. Reading is fundamental. Yep, gotta get a die and match it up. Good lick.

​