its finally coming together!!!!!

S

Slow89_lx

Member
#1
#1
its been awhile ladies and gents so first of all happy holidays to you all, so ive been plannin and getting things ready for the build of my 89 notch so after some time i decided to grab the bull by the horns and this is what ive been planning and im finally ready to start it, the notch is coming apart im shaving and tucking my engine bay, chassis coating the underside with por-15, and its going from canary yellow to plum insane pearl with rich pink pearl. the suspension is already sitting here and waiting to be installed.
for the front..
qa1 tubular k member
qa1 tubular a arms
strange 10 way adjustable struts with the strange coil over kit
racecraft 2'' drop spindles
qa1 bumpsteer kit
ssbc front brake upgrade

for the rear
team z roll control
team z adjustable upper and lower control arms
team z sphericle bearings
strange 10 way adjustable shocks
2'' lowering springs
fully built 8.8 with 4.10s and rebuilt posi unit. as of right now im just waiting to roll it into the garage so i can start ripping it down i guess this is gonna be my first build thread, any input is welcome... :rock:
 
adkmach1

adkmach1

Well-Known Member
#2
#2
Happy holidays, sounds like a great build. Make sure you take pictures and post them in build thread. Good luck and keep us posted.
 
S

Slow89_lx

Member
#3
#3
will do my friend, im still undecided on a motor set up ive got the windsor on the stand i think over the spring and summer ill be doing the drive train part of it, but im really leaning towards a 408 on a healthy shot of spray:evil:
 
AdirondackFox08

AdirondackFox08

Member Plus
#8
#8
Sounds like a great start to the build! Team Z makes some good suspension parts. Are you keeping it efi? I always thought a mean 408 would be a great fit in a light notch.
 
S

Slow89_lx

Member
#9
#9
It'll get pic heavy pretty quick guys! Just waiting some space to be cleared in one of my brothers garage bays and I can start ripping it down as of right now the old 306 is out, and the wiring has started being tucked and all the body panels are off the front of the car. Adirondack fox ill be going carb this time just because its I find it easier to tune myself. I'll keep the updates coming as they come in :)
​
 
You must log in or register to reply here.