how do you get your stang to hook?

[NYthurobreds1320]

post up ideas you have herd or use to make ur stang hook.

i recently herd beer and soda burnouts do the trick. anyone use that method?

 

[Mach1Jack]

VHT TrackBite

 

[NYthurobreds1320]

lol i was looking for a more in depth convo starter lol....do you have any special method of applying it?

 

[BlackStang14]

Mickey Thopson street rads... Relocation bracket, LCAS, UCAS, Severe duty panhard bar, K member with torque limiters, drag springs, if you wanna go crazy some bogarts with MAD tire for some nice crinkle...

 

[1QWKVERT]

Dude, VHT with resin make'sa nice sticky launch spot

http://1320video.com/Dec1Mexico.php

It's on that DVD i let you borrow dude

 

[NYthurobreds1320]

lol the point of the post is to be a convo starter...i know VHT makes it sticky i was looking for more along the lines of how each person likes to lay it down or diff techniques they use

 

[TERROR]

if your on concrete throw some down and light it on fire let it burn. Then pour some on the tires and do your burnout and your good to go

 

[EHA Racing]

I do massive burn-outs LOL!! That coupled with a mini-tub, 28x10.5W's, narrowed rear, UPR torque link uppers and anti-roll bar, Wolfe Racecraft adjustable lowers, QA1 10 way coil overs and a spool make for a hell of a launch!!!
Actually I start my burn-outs in 2nd gear till I tap the rev limiter then pull it to 3rd. 2 seconds in third I let off the line-lock and burn halfway up to the lights. The car hooks great but cleaning off the rubber is a bitch!!

 

[Flavadave]

Get yourself some drag radials, drop the pressure and start playing with how fast you can let out the clutch!

 

[MISERY4U]

I have used oragnge soda wit my 275/60 radials & john force burnout... N i yanked the wheels on the street

 

[Mach1Jack]

The car hooks great but cleaning off the rubber is a bitch!!

Is that your brothers job? lol

 

[slapnotch]

low air pressure and a nice burnout get my hoosiers sticky enough

but thats on the track i dont bother with the street no more

 

[1QWKVERT]

I have used oragnge soda wit my 275/60 radials & john force burnout... N i yanked the wheels on the street

That sound's like it's worth a shot

 

[Pitbull Performance]

I have found this setup to work very well for me and my hard core drag racing customers.

HPM Mega bite Jr's UCA

HPM Mega bite Jr's LCA

With M/T 28X10X15 ET Drag or M/T 275/60/15 Drag Radial

Set the pinion angle and -2 degrees (FOR A STARTING POINT).

Good VHT burn out

Drop the hammer and hold on.

 

[NYthurobreds1320]

ive herd the mega bites are hell on your torque boxes...right now i run upr double adjustables with the pivot cup...and yeah im curious about the soda....how bout some maple syrup too lol. or maybe 325s

 

[Pitbull Performance]

ive herd the mega bites are hell on your torque boxes...right now i run upr double adjustables with the pivot cup...and yeah im curious about the soda....how bout some maple syrup too lol. or maybe 325s

HPM Mega bite Jr's are hard on the torque boxes. When we install the mega bite Jr's we also install a set Battle Boxes That get welded in to reinforce the torque boxes to handle the added stress on them. (unless already installed) I have also found that any control arm that works as we as the mega bite Jr's, will need battle boxes installed.

 

[NYthurobreds1320]

yeah thats what i did before i put the slicks on it..i had my buddy mike weld the hell outta the boxes and put reinforcements on them

 

[King Mustang]

Soda or bleach but you can't beat VHT !

 

[n20capri]

I have Steeda upper and lowers with the Eibach drag launch kit. Hooks well...1.57 60ft's

There is a dude around here (Philly) who has a little pump and nozzles in each wheel well...his squirts them with VHT for launching on the street...car hooks like mad...lol

 

[toomanytoys]

Im old school-- I have Southside lift bars. That and Strange adj struts up front with a -3 deg pinion angle and 275/60 M/T dr's. Car goes 1.6 60fts with a 4k rpm launch.