Harris Speed Works Nitrous

[modularmustang]

Hey, figured I'd ask here and see what everyone thinks of this brand for nitrous. I was planning on running a small dry shot in my pi swapped stang (mods in sig, besides iridium sparks and 180 stat).

With my 93 octane tune running 24-29 degrees at WOT through the rpm range and 12.9-13.0 AFR would I be ok with say a 75 shot or maybe a 100? The kit doesn't include a heater, is it required?

http://www.harrisspeedworks.com/product.php?productid=451&cat=96&page=1
^$290

http://www.harrisspeedworks.com/product.php?productid=6
^$130

My sniper tune timing I'm running +2 global, +1.5 low, +2 mid, +2.5 high.
I bought new AR94 plugs a while back when i was told I needed them for just the pi swap...(lies) would they still be too cold for a 100 shot?

Another thing, would the plenum spacer style injection be something to look into verses before the TB?

 

[booby]

EHA_Racing is the dude to ask about nitrous, he helped a ton on my juice questions a few threads down

 

[302N20]

HSW is a very good company to use.

 

[modularmustang]

would 24# injectors be enough for a 75 dry shot? what about my fuel pump?

 

[302N20]

I'm not sure about on a Mod Motor. I can tell you I ran 24#er's on my h/c/i 302 with a 100 dry shot and it was ok. I also had a 190lph pump in my tank. Fuel pump should be upgraded to atleast a 190lph, but a 255lph costs almost the same so why not put that one in.

 

[TBapp3]

EHA_Racing is the dude to ask about nitrous, he helped a ton on my juice questions a few threads down

I wish I could help out on the situation...But booby is right try sending EHA Racing a PM!