Gauge install help

[jrmandryck]

Hey fellas I'm installing gaugues on the A pillar this week and was curious where everyone puts the power wire to? Also do you run 3 seperate wires or splice them together and just run one?

 

[Wicked One]

Splice all 3 toget to a minimum 18ga wire. Run the wires to the passenger kick panel. Inside there is a fuse box. Find a switched circuit. I can't remember what one it is. When you find it use an add a fuse and wire the gauges in. The groung can be brought to any piece of metal under the dash

 

[matt07gt]

^^^ Yup. I used a 18g wire when I had gauges installed on my car this past summer. What type of gauges are you running?

 

[jrmandryck]

Volt meter, vacuum and air air/fuel ratio. autometer gauges