FrankenEngine

S

SteveWolf1965

Member
#1
#1
I'm trying to figure out what I'm packing under the hood of my '67 vert resto project. I already know it has a 1969 351W based on the serial #. The intake is D70E-9425 BD which I deciphered to be off a 1977 LTD II. The carb I'm assuming is a 2150 motorcraft based on photo comparisons (the tag and stamp are non-existent. The heads are a mystery to me. I removed the valve covers and saw some stamps- 8B7, WC, 78, 8B27, don't know what they mean.

I'd like to buy a carb rebuild kit, but not sure what to get or where to get it.

Can anyone fill in the blanks or offer any input on this combo? Pics to follow...

Thanks,
Steve
 
ponyboy289

ponyboy289

Classic Mustang Guru
#3
#3
Hey Steve,
Based on the photo that carb is a 2150, the best deal on a rebuild kit would be from advance or autozone.They sometimes stock those kits. There is most likely a toe stamp on the front lower drivers side foot of the carb ( but it's not important )It is currently being blocked by that dashpot. Without seeing more info,etc. I'm likely to guess someone swung a complete 70's 351 ( cleveland or windsor ? ) into your car. Good luck
 
S

SteveWolf1965

Member
#4
#4
Thanks for the reply. I figured out the 351W was from a 1979 LTD II, not a 1969; I read the code wrong. And yes, the carb is a 2150. I followed your advice on the rebuild kit which worked out well. Rebuilding the carb was something I really enjoyed. Thanks again.
​
 
You must log in or register to reply here.