eaton supercharger

[wildponies]

has anyone ever heard of putting on an 03 cobra eaton supercharger on a 1999 cobra. My friend is parting out a totaled 03 cobra and asked me if I wanted the supercharger..is there a kit that is sold to make the conversion?

 

[Chillzzz]

i dont think they are compatable, is it the same motor without a s/c

 

[DownSet4130]

take the whole motor and do a swap...

 

[wildponies]

not sure what the dif is internaly other than one is an aluminum block and the other is cast iron.

 

[wildponies]

has the motor sold already.. otherwise I would ...in a heart beat..

 

[DownSet4130]

if the motor the same i don't see why you cant just put it on. the corral might be a good place to search for the answer to that.

 

[irishpwr46]

Definitely check the Corral

 

[Chillzzz]

dont they have different number of valves like cobra termi is 3 valve and ur cobra is 2??`

 

[wildponies]

its doable there a guy on the hpextreme that did the swap..looks like alot of work to get the job done but he has helped his friend just recently on an 01 also. I think I might go and get it in the morning.

 

[SSChris NY.]

It can be done and it has been done with decent results, but your going to need more than just the Blower, There's a complete list of all the parts your going to need to do the swap, Check SvtPerformance or Modular Ford, just do a search on the subject and you will find the complete list and all U need to do the swap, Good Luck

 

[scotts99snake]

2r3z6312baa - Crank pulley /Harmonic Balancer
f1az6378a - washer for balancer
f5rz6a340b - bolt for balancer
2r3z6312ba Supercharger Crank drive pulley
(8678A) Pulley w/mount Replaces stk. alt. Pulley on 99-01 Cobra’s and 03/04 Mach 1’s
2r3z6b209bc - Pulley bridge assembly for S.C. (If bought new it comes with the bridge, 2 idlers and tensioner)
n808920s437 - Pulley bridge bolts
(8678B) Idler pulley,timing cover pass. side
yw7z8678aa - pulley on drivers side of timing cover
(6D080) Timing cover (if bought new, it comes w/ pulley on drivers side and tensioner)
s5az6700a - timing cover seal
(10A313) Upper alternator bracket
N605909s437 - (4) bolts for the upper alt. bracket
(10153) Lower alternator bracket
n807274s437 (1) lower alt. bracket to alt bolt
(10346) Alternator
1U2Z-14S411-TA Electrical connector (alt. to harmness )
(6B209A) Tensioner on timing cover
2r3z8260ab - Radiator hose
2r3z8a593ab - Radiator hose
2r3z8k576aa - Radiator hose
2r3z8548aa - Water cross over pipe
(6881) Cobra oil cooler adapter
(6A642) Cobra Oil cooler
2r3z9002aa - Cobra fuel tank (optional)
2r3z9h307ab - Cobra fuel pump (optional)
2r3z6f066aa - Eaton supercharger
n811313s431 (4) studs to bolt plenum to s/c
2r3z9424bb - Lower intake
(6K775) Garrett factory intercooler
w506404s437 (10) i/c to s/c bolts
3U2Z-14S411-SSA IAT2 sensor connector
2r3z9n491ca - Intercooler hard lines that hug the block (If bought new, it comes w/ part # 9l443c)
(9N491A) Intercooler hard lines that come from the h/e
3r3z9l443aa - Intercooler line that goes from the i/c adapter to i/c res.
2r3z9l443ba - Intercooler line that goes from the i/c adapter to the hard lines that hug the block
2r3z9l443ca - Intercooler line that goes from the hard line against the block to i/c pump(included w/ the hard line that hugs the block if purchased new)
2r3z9l443da - Intercooler line that goes from hard line to hard line
2r3z9l443ea - Intercooler line that goes from hard line from h/e to i/c pump
2r3z9l443fa - Intercooler line that goes from hard line and connects to h/e
2r3z9l443ga - Intercooler line that goes from hard line and connects to h/e
f8yz8501aa - Ford / Bosche water pump for intercooler
2r3z8n500ac - Intercooler pump bracket
2r3z8k226aa - Factory heat exchanger
2r3z8a193aa - Heat exchanger mounting bracket
2r3z8c386aa - 2each bracket clamps for h/e
n606677-s36 (4) Bolts to bolt the bracket clamps to the h/e bracket
(9N491B) Lower manifold to intercooler water adapter
2r3z9a589ca - Plenum
(9B659) Intake tube from maf to t/b.
(9F715) IAC valve
2r3z9f593ba - Injectors
(6F089) Boost bypass actuator
2r3z9a825aa - Cruise control cable
2r3z9a758aa - Throttle cable
(9728) Throttle and cruise control cable mounting bracket
1l3z12b579aa - MAF
xw4z9d475ab - EGR valve
2r3z9d477ad - EGR tube
(6C324) PCV tubing
(9F479) Sensor on the back of the S/C
(9J432) Bracket for vacuum stuff on left side of the S/C
(9H465) Vacuum stuff
(9J459) Vacuum stuff
(9J460) Vacuum stuff
(9E498) Hose's or tube cluster of connectors for the vacuum parts above
e83z9f670a IAC gasket
2r3z6020aa - Timing cover gasket LH side
2r3z6020ba -Timing cover gasket middle
2r3z6020ca - Timing cover gasket RH side
2r3z9h486aa - Lower intake to S.C. gasket
2r3z9l437bb - Plenum to S/C gasket
e6az9d476b - EGR gasket
2r3z3490aa - Power steering resevoir bracket.
I/C resivoir tank
i/c pigtail
S/C 8 rib belt
inner acc. belt.
n804178s309 - (8) Nuts for plenum, coolant crossover and pulley bride can be picked up at local auto parts store in help section.
n805164437 - (1) Bolt for pulley cage to timing cover.

 

[Timspony]

...Just get a Vortech or Turbo

 

[wildponies]

I have to pay for a vortech, this eaton is for free.....

 

[DownSet4130]

2r3z6312baa - Crank pulley /Harmonic Balancer
f1az6378a - washer for balancer
f5rz6a340b - bolt for balancer
2r3z6312ba Supercharger Crank drive pulley
(8678A) Pulley w/mount Replaces stk. alt. Pulley on 99-01 Cobra’s and 03/04 Mach 1’s
2r3z6b209bc - Pulley bridge assembly for S.C. (If bought new it comes with the bridge, 2 idlers and tensioner)
n808920s437 - Pulley bridge bolts
(8678B) Idler pulley,timing cover pass. side
yw7z8678aa - pulley on drivers side of timing cover
(6D080) Timing cover (if bought new, it comes w/ pulley on drivers side and tensioner)
s5az6700a - timing cover seal
(10A313) Upper alternator bracket
N605909s437 - (4) bolts for the upper alt. bracket
(10153) Lower alternator bracket
n807274s437 (1) lower alt. bracket to alt bolt
(10346) Alternator
1U2Z-14S411-TA Electrical connector (alt. to harmness )
(6B209A) Tensioner on timing cover
2r3z8260ab - Radiator hose
2r3z8a593ab - Radiator hose
2r3z8k576aa - Radiator hose
2r3z8548aa - Water cross over pipe
(6881) Cobra oil cooler adapter
(6A642) Cobra Oil cooler
2r3z9002aa - Cobra fuel tank (optional)
2r3z9h307ab - Cobra fuel pump (optional)
2r3z6f066aa - Eaton supercharger
n811313s431 (4) studs to bolt plenum to s/c
2r3z9424bb - Lower intake
(6K775) Garrett factory intercooler
w506404s437 (10) i/c to s/c bolts
3U2Z-14S411-SSA IAT2 sensor connector
2r3z9n491ca - Intercooler hard lines that hug the block (If bought new, it comes w/ part # 9l443c)
(9N491A) Intercooler hard lines that come from the h/e
3r3z9l443aa - Intercooler line that goes from the i/c adapter to i/c res.
2r3z9l443ba - Intercooler line that goes from the i/c adapter to the hard lines that hug the block
2r3z9l443ca - Intercooler line that goes from the hard line against the block to i/c pump(included w/ the hard line that hugs the block if purchased new)
2r3z9l443da - Intercooler line that goes from hard line to hard line
2r3z9l443ea - Intercooler line that goes from hard line from h/e to i/c pump
2r3z9l443fa - Intercooler line that goes from hard line and connects to h/e
2r3z9l443ga - Intercooler line that goes from hard line and connects to h/e
f8yz8501aa - Ford / Bosche water pump for intercooler
2r3z8n500ac - Intercooler pump bracket
2r3z8k226aa - Factory heat exchanger
2r3z8a193aa - Heat exchanger mounting bracket
2r3z8c386aa - 2each bracket clamps for h/e
n606677-s36 (4) Bolts to bolt the bracket clamps to the h/e bracket
(9N491B) Lower manifold to intercooler water adapter
2r3z9a589ca - Plenum
(9B659) Intake tube from maf to t/b.
(9F715) IAC valve
2r3z9f593ba - Injectors
(6F089) Boost bypass actuator
2r3z9a825aa - Cruise control cable
2r3z9a758aa - Throttle cable
(9728) Throttle and cruise control cable mounting bracket
1l3z12b579aa - MAF
xw4z9d475ab - EGR valve
2r3z9d477ad - EGR tube
(6C324) PCV tubing
(9F479) Sensor on the back of the S/C
(9J432) Bracket for vacuum stuff on left side of the S/C
(9H465) Vacuum stuff
(9J459) Vacuum stuff
(9J460) Vacuum stuff
(9E498) Hose's or tube cluster of connectors for the vacuum parts above
e83z9f670a IAC gasket
2r3z6020aa - Timing cover gasket LH side
2r3z6020ba -Timing cover gasket middle
2r3z6020ca - Timing cover gasket RH side
2r3z9h486aa - Lower intake to S.C. gasket
2r3z9l437bb - Plenum to S/C gasket
e6az9d476b - EGR gasket
2r3z3490aa - Power steering resevoir bracket.
I/C resivoir tank
i/c pigtail
S/C 8 rib belt
inner acc. belt.
n804178s309 - (8) Nuts for plenum, coolant crossover and pulley bride can be picked up at local auto parts store in help section.
n805164437 - (1) Bolt for pulley cage to timing cover.

Dam Thats it, won't he also need a flux capacitor?

 

[scotts99snake]

Dam Thats it, won't he also need a flux capacitor?

What? Did I forget the flux capacitor in the list??

 

[wildponies]

thanks for the list of stuff scott, but thats just to much crap to go through for this set up..I am gonna post it up on ebay when Igo and pic it up latter..Better off with a pro charger and just bolt that bitch right on..

 

[Timspony]

that's what I said ^^^^^

 

[scotts99snake]

thanks for the list of stuff scott, but thats just to much crap to go through for this set up..I am gonna post it up on ebay when Igo and pic it up latter..Better off with a pro charger and just bolt that bitch right on..

That is the route I took. If you want a top mount, like a roots or twin screw, you might as well pay the little extra and order a complete kit through Kenne Bell, the 2.1 You will end up paying a little more but will be tons less headaches and you will get a much more efficient supercharger.