Alright guys, thought I'd post up a member project thread. I decided against the Vortech air/water intercooler and I am going to do a custom system with the help of a fabricator I know.
Here's the part list so far (once they come in, I'll take snapshots)
1. Maxflow Racing Blowoff Valve
2. Treadstone TR10 Intercooler (10.5x24x3.5) (less then 1 psi drop and 666HP capable)
3. Treadstone Aluminum Piping kit to help the fabricator
4. Coolant relocation kit
5. Battery relocation kit (already here)
6. MAFIA extender
7. Long tubes w/ H pipe (high flow cats)
I was advised by Joe at Mustang Magic that a blow through design is much better so the MAF will be relocated between the throttle body and intercooler and then the blow off valve will be located between the sc head unit and intercooler rather then a draw through system.
I'll keep this thread updated!!
Here's the part list so far (once they come in, I'll take snapshots)
1. Maxflow Racing Blowoff Valve
2. Treadstone TR10 Intercooler (10.5x24x3.5) (less then 1 psi drop and 666HP capable)
3. Treadstone Aluminum Piping kit to help the fabricator
4. Coolant relocation kit
5. Battery relocation kit (already here)
6. MAFIA extender
7. Long tubes w/ H pipe (high flow cats)
I was advised by Joe at Mustang Magic that a blow through design is much better so the MAF will be relocated between the throttle body and intercooler and then the blow off valve will be located between the sc head unit and intercooler rather then a draw through system.
I'll keep this thread updated!!