Hey Guys,
Up for sale is a Crossfire P Series Subwoofer that is already mounted in a Speaker Enclosure. This Crossfire Subwoofer was already installed in my GT when I bought it a couple of months ago. I tried it out for a bit and decided that booming bass just really isn’t my thing and that I needed more trunk space more than I needed my mirrors to rattle so my loss is your gain.
This Crossfire sub sounds excellent, with really clear, crisp lows that seem to be really hard to find out of a subwoofer. This sub will definitely get others to hear you when you’re cruising the streets. The enclosure seems to be made out of solid wood and is asymmetrical on one side to allow the subwoofer to breathe better, thus allowing better bass. The enclosure is also covered in a carpeted material (which very well may be carpet) that matches most trunks. It fits perfectly in a New Edge trunk, leaving roughly 3/4ths of it free. If it fits in a New Edge, I'm almost certain its going to fit in just about any other Mustang. It also has plenty (at least four feet) of lead left so it’ll be very easy to wire up to your amplifier in all but the longest of cars.
If the buyer is local and wants to come pick it up, when they come down I can hook it back up to my car’s amplifier so that they can get a good feel for how it sounds. I’m located in Brooklyn (Park Slope to be exact) and I'd prefer to do a local sale. However, I don't mind shipping or meeting up either if you're in the tri-state area, buyer just pays shipping and handling or gas, as well as any Paypal fees if thats what the buyer prefers. I’m asking $120 or your best offer. If you have any questions or would like specific pictures or sound clips, feel free to PM me or reply to this thread and I'll do anything I can to help.
Thanks!
Christian
Measurements and Specs:
12" speaker
10.8" tall
21.5" long
14.5" wide
Polymica Cone with Butyl Rubber Edge, Structurally Reinforced Proprietary Cast Basket, 2.5" High temperature voice coil on Kapton former, Large dual- stacked 60 oz. magnet, Bumped backplate with Forced Intake & Radial Exhaust cooling system, Flexible Impedance Technology (user switchable 2 or 8 ohm), Push terminals, 400 watts
Asking- $125 OBO
Located in Park Slope, Brooklyn, NY
Up for sale is a Crossfire P Series Subwoofer that is already mounted in a Speaker Enclosure. This Crossfire Subwoofer was already installed in my GT when I bought it a couple of months ago. I tried it out for a bit and decided that booming bass just really isn’t my thing and that I needed more trunk space more than I needed my mirrors to rattle so my loss is your gain.
This Crossfire sub sounds excellent, with really clear, crisp lows that seem to be really hard to find out of a subwoofer. This sub will definitely get others to hear you when you’re cruising the streets. The enclosure seems to be made out of solid wood and is asymmetrical on one side to allow the subwoofer to breathe better, thus allowing better bass. The enclosure is also covered in a carpeted material (which very well may be carpet) that matches most trunks. It fits perfectly in a New Edge trunk, leaving roughly 3/4ths of it free. If it fits in a New Edge, I'm almost certain its going to fit in just about any other Mustang. It also has plenty (at least four feet) of lead left so it’ll be very easy to wire up to your amplifier in all but the longest of cars.
If the buyer is local and wants to come pick it up, when they come down I can hook it back up to my car’s amplifier so that they can get a good feel for how it sounds. I’m located in Brooklyn (Park Slope to be exact) and I'd prefer to do a local sale. However, I don't mind shipping or meeting up either if you're in the tri-state area, buyer just pays shipping and handling or gas, as well as any Paypal fees if thats what the buyer prefers. I’m asking $120 or your best offer. If you have any questions or would like specific pictures or sound clips, feel free to PM me or reply to this thread and I'll do anything I can to help.
Thanks!
Christian
Measurements and Specs:
12" speaker
10.8" tall
21.5" long
14.5" wide
Polymica Cone with Butyl Rubber Edge, Structurally Reinforced Proprietary Cast Basket, 2.5" High temperature voice coil on Kapton former, Large dual- stacked 60 oz. magnet, Bumped backplate with Forced Intake & Radial Exhaust cooling system, Flexible Impedance Technology (user switchable 2 or 8 ohm), Push terminals, 400 watts
Asking- $125 OBO
Located in Park Slope, Brooklyn, NY
Attachments
Last edited:
