BIG REDS 67 Fastback build thread.
- Thread starter BIG RED
- Start date
spent most of today getting the fuel system all sorted away, I built a tank vent. However due to the design of the filler neck I needed to add a secondary vent to let air out when the car is being filled with gas. This proved to be quite a project
so out came the tank, notice the old gas in the pan which would explain why the car wasnt running great after the body shop.
had a AN fitting welded on the tank for the vent hose.
tank all back in with the filler neck back on, not pictured but the top of the filler neck has a tube on it that the hose slides on to.
the next area of concern was the fuel lines that ran right above the exhaust, granted they were hard lines but I wrapped them in fire sleeve to prevent vapor lock.
I also got the mirrors mounted.
so out came the tank, notice the old gas in the pan which would explain why the car wasnt running great after the body shop.
had a AN fitting welded on the tank for the vent hose.
tank all back in with the filler neck back on, not pictured but the top of the filler neck has a tube on it that the hose slides on to.
the next area of concern was the fuel lines that ran right above the exhaust, granted they were hard lines but I wrapped them in fire sleeve to prevent vapor lock.
I also got the mirrors mounted.