5 speed swap

[wildponies]

OK I found this guy out buy me parting out his 93 lx 5.0...
He said $400.00 for all the parts to convert to stick..

I am going to take the deal. just want confirmation on what parts I should be getting from him.

1. Trany
2. pedal Assembly
3. harness
4. drive shaft
5. Flywheel
6. clutch assembly
7. clutch cable

what else help finish the list.. Thanks guys.

Dave feel free to edit the list, you know the parts I am sure...lol

 

[MaximumRisk]

flywheel, clutch assembly, clutch cable.
I have a king cobra clutch we can throw in there and one of those "universal" adjustable cables. The quality of these cables are not great, but they do the job. I also have a Ford Racing flywheel but don;t know if it fits a Fox, have to check the part number.
Or you could just pull all of that stuff from the donor car

 

[wildponies]

Thanks Waldo list updated... he said full trany swap all parts needed. He is parting out the entire car..

 

[dsblk93gt]

I ran my AOD driveshaft but you might as well get the T-5 one from him.

Make sure you get the engine plate as well. Get the lower shift boot and upper shift boot if it is in good shape as you will need those.

 

[wildponies]

engine plate? never thought of that.. thanks Dave and Waldo!

 

[PJB]

tranny crossmember

Thats a hell of a deal for a complete swap. I drove to PA to get my swap parts and paid $750 and that didnt include the pedal assembly.

 

[dsblk93gt]

I used the same crossmember, there is enough adjust-ability in the stock slotted mount for the AOD.

 

[dsblk93gt]

Yea, thats a smoking deal. I traded some 17" rims and all new tires for my 5spd swap and still didn't get that much stuff

 

[wildponies]

spoke with the guy and wants to meet thursday night!

 

[Wicked One]

I just did a reverse swap from 5sp to auto.

The only snag was the harness on the side of the tranny. The auto has a few more wires that will not be used at all. You will need the clutch/neutral safety swith and the backup lights.

Let me know when you are gonna do this And I will give you a hand. Not a bad swap but changing the pedals is a little pain in the butt.

 

[teknik]

I just saw this post....did you get the parts???
When are we doin' this??? I'm game.
You don't really need it, but the ECU is nice to get also.

 

[wildponies]

Got it. doing it over the winter after i move in my new house.

 

[EHA Racing]

Don't forget to get a pilot bearing for the back of the crank. One of those things that is always forgot until you are doing the job LOL.

 

[dsblk93gt]

Don't forget to get a pilot bearing for the back of the crank. One of those things that is always forgot until you are doing the job LOL.

It does wonders to the bearing retainer when you forget to install one LOL.

 

[wildponies]

Thanks guys! just need to go stick driving an auto is like watching old people screw...lol slow and sloppy...hahahaha

unless your driving a 600+ hp Stang then thats different but for around town it sucks.

 

[EHA Racing]

$7,500 I'll built you a pump gas 600hp n/a 363 with an SVO Rblock complete with headers. Intake to pan. Let me know LOL. I have everything but the cam and your choice of pistons!! You could also spray the snot out of it! Hell I went 8.83 on it haha!!

 

[wildponies]

I wish Doug... Need every penny for the new house..