5 lug conversion for fox body

[JOEMACH]

I just picked up a 1990 GT mustang. I want to swap over to 5 lug. Now I already have a complete front disk set up off a 1998 SN-95 Mustang. How much of an ordeal is it to swap this stuff? Is it a bolt on or do I need all sorts of little stuff. Also as far as the rear goes, should I do a 5 lug drum conversion or go with a complete disk rear swap out of a late model.

I'm old school and swapping back and forth with the 60's and 70's Mustangs is nothing to me but I'm a little in the dark on what fits what between the Fox and SN-95 Mustangs.

Thanks in advance

 

[88Notch]

This should answer all your questions. It's a lot of info, so read it a couple of times.. i had to. lol..
http://www.sn95brakes.com/5lug.php

Take a look at this as well, it tells you all the parts you will need.
http://www.fordracingparts.com/download/instructionsheets/FordInstShtM-2300-K.pdf

 

[HaggardHatch]

Just go to autozone or whatever store you have near you and buy 88' lincoln lsc rotors. you can just pop those bad boys on the front with the stock brakes and spindles that are on the car. the rears you will have to buy new axels and 5 lug drums. boom 5 lug

 

[2007VistaBlueGT]

The 5 lug conversion isn't difficult at all. Ford Racing and SSBC have complete disc 5 lug conversions.

 

[JOEMACH]

very cool, thanks for the info.......I'll post pics as soon as I get it swapped.......now if it would just stop raining......working outside really blows.

 

[Wookie]

This is the best writeup that I've found since I've been looking into doing this swap.

http://www.stangnet.com/tech/lug.html