Mustang and Ford high performance parts:
1994 351w roller block built into 393ci stroker with 8.9 compression. Eagle crankshaft, Probe 30cc blower/turbo pistons, DSS 5.956 H-beam connecting rods. Clevite bearings, ARP main studs, main girdle, Canton race pan with turbo oil drains. Competition Cams .609 lift blower/turbo hydraulic roller camshaft. ARP head studs, Flatout MLS head gaskets, Trickflow chromoly pushrods, Edelbrock Victor Jr cylinder heads, Competition Cams Pro Magnum 7/16" stainless steel rockers, Edelbrock Victor Jr intake, Felpro 1262R intake gaskets, fabricated aluminum valve covers.Solid engine mounts.Distributor is locked out for use with a boost application. Only street driven a few hundred miles with no track time. $4500
Fox body twin turbo setup. I built the kit to run on a 393ci windsor with Victor Jr heads. Twin On3 76mm turbos with .68 A/R exhaust housings. K&N airfilters, turbo blankets, Twin Xo2 46mm waste gates with braided lines, 50mm Tial BOV, braided oil feedlines and -10 Aeroquip blue return lines, 3" coldside with huge 4" core air to air intercooler. BBK shortys with v-bands, Hot side is fully v-banded and dumps infront of rear axle. Fast dual channel wide band. Complete kit ready to bolt in and run. Must be used with turbular front suspension which I have available for extra money. Turbos are capable of well over 1500hp. $3500
I also have the complete fuel system available to buyer of the kit or engine. Blue Paxton (Aeromotive made) A1000 fuel pump with filters, Aeroquip socketless -10 feed and return fuel lines with fittings, 16gallon fuel cell with sending unit, Aeromotive 13202 boost referenced regulator with braided steel fuel lines to carburator. Holley750 setup for blow thru with ProForm center. Extreme Velocity carb hat with 1" spacer welded on.. $1350
Team Z dropped tubular k-member, tubular a-arms and coilover kit with 150lb springs. Will only be sold with turbo kit or after it is sold. $500
Will make package deal.
1994 351w roller block built into 393ci stroker with 8.9 compression. Eagle crankshaft, Probe 30cc blower/turbo pistons, DSS 5.956 H-beam connecting rods. Clevite bearings, ARP main studs, main girdle, Canton race pan with turbo oil drains. Competition Cams .609 lift blower/turbo hydraulic roller camshaft. ARP head studs, Flatout MLS head gaskets, Trickflow chromoly pushrods, Edelbrock Victor Jr cylinder heads, Competition Cams Pro Magnum 7/16" stainless steel rockers, Edelbrock Victor Jr intake, Felpro 1262R intake gaskets, fabricated aluminum valve covers.Solid engine mounts.Distributor is locked out for use with a boost application. Only street driven a few hundred miles with no track time. $4500
Fox body twin turbo setup. I built the kit to run on a 393ci windsor with Victor Jr heads. Twin On3 76mm turbos with .68 A/R exhaust housings. K&N airfilters, turbo blankets, Twin Xo2 46mm waste gates with braided lines, 50mm Tial BOV, braided oil feedlines and -10 Aeroquip blue return lines, 3" coldside with huge 4" core air to air intercooler. BBK shortys with v-bands, Hot side is fully v-banded and dumps infront of rear axle. Fast dual channel wide band. Complete kit ready to bolt in and run. Must be used with turbular front suspension which I have available for extra money. Turbos are capable of well over 1500hp. $3500
I also have the complete fuel system available to buyer of the kit or engine. Blue Paxton (Aeromotive made) A1000 fuel pump with filters, Aeroquip socketless -10 feed and return fuel lines with fittings, 16gallon fuel cell with sending unit, Aeromotive 13202 boost referenced regulator with braided steel fuel lines to carburator. Holley750 setup for blow thru with ProForm center. Extreme Velocity carb hat with 1" spacer welded on.. $1350
Team Z dropped tubular k-member, tubular a-arms and coilover kit with 150lb springs. Will only be sold with turbo kit or after it is sold. $500
Will make package deal.