F/S 302/351 blocks motors and performance parts

[4eyedcoupe]

Have all sorts of SBF stuff that needs to go. Trades considered would be for aftermarket suspension stuff, fox coupe interior, fox manual doors(would trade my electric), modular motor parts(2v. or 4v), LSX parts, or a tuner/tuning software. Feel free to make an offers



302 short block, E5 casting(roller), stock bore with stock internals, ready to run just add top end and excessories. $150

351 shortblock, non-roller, stock bore with stock internals, ready to run, just needs top end and excesories.(will include stock E5 heads) $300

351 long block, non roller, complete pan to stock carb intake, needs rebuild or freshing, $150

351 bare block, stock bore, great place to start a complete engine build. $50

351 swap oil pan with pick-up(FRPP) $75

351 BBK swap headers(shortys) slightly used, excellent shape. $175

302 Hooker equal length shortys, used in excellent shape. $125

Vic Jr 351 carb intake, 9.5 deck(part # 2981)brand new in the box $275

SBF QA1 tubular K-member, has only been bolted to car, never seen the street

Tubular a-arms for Sn95(can be used on fox with S197 wheels), brand new, never used $125

SBF Poly motor mounts(red) have only been bolted to motor for test fitment

AOD trans(no convertor) with B&M shift kit, been sitting in dry storage since shift kit was installed(about 4 years ago)

Bassani 3inch xpipe for shorty headers, slightly used but in excellent shape

GT40 3 bar heads, ported, completely bare. They were tanked and magnafluxed upon removal

Moroso front trick springs

 

[BMad]

What are you looking to get for the k member, and is it for a fox body?

 

[4eyedcoupe]

What are you looking to get for the k member, and is it for a fox body?

$200. It's still on the car, but will be coming off in a couple weeks or so when the new motor is ready to drop in.

 

[351Cobra]

I might be interested in the bbk long tubes. What are you looking for as far as fox interior? I have coupe rear interior quarters that are very nice. Gray and black. I also have a almost perfect gray dash with no fading, grime or anything. Its really nice. Have a bunch of other misc gray interior stuff that is pretty nice. Let me know.

I also have completely rust free manual doors and might consider trading. How are yours?

Thanks!
Keith

 

[4eyedcoupe]

I might be interested in the bbk long tubes. What are you looking for as far as fox interior? I have coupe rear interior quarters that are very nice. Gray and black. I also have a almost perfect gray dash with no fading, grime or anything. Its really nice. Have a bunch of other misc gray interior stuff that is pretty nice. Let me know.

I also have completely rust free manual doors and might consider trading. How are yours?

Thanks!
Keith

I don't have long tubes, I have shortys....But I think I might kee them and weld on a new head side flange for my new project. I have a dash, I do need the rear interior quarters, and a gray back seat for a coupe(at least just the back of the seat, I have several bottoms). My doors are spotless, currently in primer. Unfortunately, the only pic I have of them is the one below of the pass side.

 

[351Cobra]

I don't have long tubes, I have shortys....But I think I might kee them and weld on a new head side flange for my new project. I have a dash, I do need the rear interior quarters, and a gray back seat for a coupe(at least just the back of the seat, I have several bottoms). My doors are spotless, currently in primer. Unfortunately, the only pic I have of them is the one below of the pass side.

101_1098_zps62050ffe.jpg Photo by jclindstead | Photobucket

I do have the rear interior quarters and they are pretty nice. Let me know. I may be interested in the motor mounts. I will also think about the doors. I'm not sure what I want to do yet. I have manual doors with PERFECT black interioir power door panels. I want manual windows, but the interior panels are so frigging nice I may just change the doors.

 

[4eyedcoupe]

I do have the rear interior quarters and they are pretty nice. Let me know. I may be interested in the motor mounts. I will also think about the doors. I'm not sure what I want to do yet. I have manual doors with PERFECT black interioir power door panels. I want manual windows, but the interior panels are so frigging nice I may just change the doors.

Well, give me a price on the interior quarrter panels.

 

[4eyedcoupe]

and I just realized my pic didn't show. For got this is one of the forums photobucket coding doesn't work on any more. I can email pics.

 

[MineralGray02K]

Photobucket works, you just need to post the direct link to the image file as an image using this button

 

[4eyedcoupe]

Photobucket works, you just need to post the direct link to the image file as an image using this button

Thanks. I'm so use to using the regular image tag, doesn't work on a few forums anymore since they changed the coding...Good to know. Thank you for fixing it.

 

[BlackVic]

What are you looking to get for the GT40 heads? Any more info on those?

 

[351Cobra]

PM Sent

 

[4eyedcoupe]

What are you looking to get for the GT40 heads? Any more info on those?

Actually, the GT40 heads just got mated to a motor I am throwing together for a friend, So I guess they aren't for sale.

 

[mustanglx89]

Is the k member the one that moves your front wheels a head 2 inches?

 

[BlackVic]

Do you have some pics or more information on the 351 engines?

 

[gw88stang]

I have a pair of 93 notch doors!!!

​

 

[4eyedcoupe]

Do you have some pics or more information on the 351 engines?

I don't have any pics, but I can have my brother take some(they are in his garage). One needs a complete rebuild, it's been sitting for a few years. It is stock bore with stock internals. The other one is in excellent condition, heads are off, but have them, just needs top end assembled and accesories to run. Neither include intake manifolds or accesories.

 

[4eyedcoupe]

I have a pair of 93 notch doors!!!

​

I'm interested only if they are manual, I don't want power window doors. Let me know.