15x8 vs 15x10 prostars

[4eyepride]

whats the biggest side that would fit on an 85 notchback would 15x10 work car rearend is stock 8.8 drums

 

[4eyepride]

oh and what size backspace should i gett??

 

[Michael B]

I used 15x8 4.5 backspace with 275/60's. had to roll the lip to keep from rubbing. I also changed control arms and removed the quad shocks. 255/60's fit without rubbing but were too short for my gears. hope this helps.

 

[BadA55f0Xxx]

For 15x10's I believe you have to get rid of the quad shocks get aftermarket lower control arms 6.5 backspacing and roll the fenders or tubs wateva u prefer. . . 15x 8 are less work I got 15x 10 and they have been sittin in my room till I save money for a rear end kit the 15x8 just need back spacing and roll the fender or bang the inner fender dependin on what tire size u want. . .good luck

 

[93redpony]

Who rolls fenders?

 

[wildponies]

Who rolls fenders?

I just bought the tool today when I get it your more than welcome to come out and use it.

 

[sbeachstang]

15x 10 6.5 BS you'll have to loose the quad shocks as stated, roll the lips(unless your car sits high in the back), and do quite a bit of massaging with a sledge hammer to your wheel wells. 15x8 5.5 BS if it sits low, you may have to do the same but ALOT less of it... based on a 28x10.5 or 275/60

 

[93redpony]

thanks let me know when we could do this.

 

[wildponies]

I will have the tool in a couple of days so as soon as I have it we can use it.