10.5 inch width rims fit stock fox?

[BadA55f0Xxx]

I have a 91 fox with stock suspension will 10.5 inch width rims fit? if not wat steps do I have to take to make them fit?? Thanks

 

[Glueyes]

3 things of the top of my head would be
proper back spacing
rolling the fenders
removing the quad shocks

I believe 363coupe runs 10.5 on his notch.I'm sure he will chime in

 

[BKD]

^ yup.........and with stock suspension you might get some bad wheel hop.....

 

[Glueyes]

unless he puts some nice lower control arms

 

[Black Dragon]

3 things of the top of my head would be
proper back spacing
rolling the fenders
removing the quad shocks

I believe 363coupe runs 10.5 on his notch.I'm sure he will chime in

those three plus you have to massage the inner fenders with a bfh to stop rubbing on extreme cornering. But if you have stock control arms you are gonna rub under hard corners no matter what, there's too much movement...

I ran them on my old ride and will run them again on my new build...

363coupe only runs 17x10s, but with that silly ass beadlock of his its probably out to 10.5, but he's got all said above and full wolfe racecraft suspension, so his rear doesn't move around, lol...

 

[363Coupe]

Mine are 10" wide.... And all stated above is what needs to be done! And don't hate on my beadlocks, You know you like em!!!!

 

[Black Dragon]

my new rears are 10.5 and I test fit them already and they fit perfectly. Just make sure you have stock track width and you use sn95 backspacing specs...

 

[BadA55f0Xxx]

Thanks. . .is it easier if I just put upr coilovers and relocate the mounting point on the rearend more in toward the housing to give me more space n get rid of all the otha things in the way lik the quad shocks and springs??