How to remove the front sway bar - Ford Mustang
The front sway bar serves one main function: it prevents body roll by keeping the wheels close to the body during hard corning. Because of this, the Mustang has a...
Front Brake Pad Change on Mustang
how to change front brakes on a mustang
The Cobra front brakes by PBR are pretty simple and the pads are very easy to change.
First I raised the wheel up and remove the tire. Used a jack stand to make...
How to remove the door panel on a 1999 - 2004 Ford Mustang
I've seen a few posts on people asking how to do different things as far as removing the door panel and it's pieces and I know a lot of people buy new...
Flushing the Cooling System on Your Mustang
The Ford Shop Manual calls for coolant that meets ESE-M97B44-A specifications.
A quick check shows Prestone and Zerex both make antifreeze/coolant that meet that specification.
Prestone...
found @ http://www.mustanghowto.com
How To Install a Cold Air Intake on your Mustang GT
The stock air box installed by Ford is rather restrictive. There are a couple of options when it comes to trying to get more air into your motor...
found @ http://www.3.8mustang.com
written by: 2kids3pets
How to retro-fit your CDC Shaker System to fit a Mach 1 Hood
CDC Shaker Kit Install on a Mach 1 Hood
This is from CDC site
Will your CDC...
How to install Cams on a Mustang GT 4.6L V8
The following cam install article is not meant to replace the cam manufacturers directions. This is a step by step list of directions that I followed to install cams in my 2000 GT...
How To Install Bullitt Pedals
The stock gas pedal on my '00 Mustang was about 1" lower than the brake pedal, making it almost impossible to heel & toe on a downshift. I did the Mustangworld pedal raising fix but there still...
How To Install Bullitt Gauges On Your Mustang GT
I didn't show pulling the instrument cluster out because I had the extra cluster and decided not to pull mine out and put it right back in just for this. Sorry.
The hardest...
How to Paint Brake Calipers
Stock is:
Take the pad bracket off of the piston.
I kept the piston section on, BC I didn't wanna unhook the line or e brake.
Prep for paint i hit it good with a wire wheel on my...