Search results

make sure your timing cover is the right kind for a revers rotation water pump if you plan on runnin a serp setup.

rims are 17" 5 lug off a 95gt tires are nice rims are flawless come take a look 518-847-1224 email for pics

body is nice red convertible doors hood truck floors windshield everything!!! call 518-847-1224 ballston lake exit 11

engine runs great body is straight some interior left (black cloth) 5 peed call 518-847-1224 located in ballston lake exit 11

i would do a leak down test and see how balanced the cylinders are. with 67k you should be good unless the motor has been abused. you should be between 6-10% across all 8. you can be off by as much as 15%

its about 30$ per cylinder plus hot tank and new cam bearings. last time i built one it was about 375 in machine work and 300 for pistons and rings.

some 3.73s and a 100 shot and he wouldnt touch you.

and check all your powers and grounds!

i would think its to keep the throttle blade from iceing in the winter but if your like me the mustang doesnt come out much in the winter...i would really like to know more!! why would no egr make you surge at idle? would takeing the egr off make you run hotter beacuse your not cooling the...

How-to: Replacing the Heater Core In An SN95 Mustang: Created by: Roushinator from fnsweet.com. Put into html doc and edited by: COBRASVT from svtperformance.com. Table of Contents: 1.First stop by an Auto shop and have the A/C drained.6...

on mine there were the 2 screws and a 7mm(i think) holding a brace under the radio

if anyone was wondering the anser is yes they are the same thing everything slides right in after about 12hours of hell

it would be a little more work but im sure you could shorten the stock motor mounts a little. and as i said i was runnin moroso build your own motor mounts that were a hair taller then stock. if i remember it was only over by a little bit i just wanted a cowl hood

yea i have a 95 so far i cant afford exhust so i just cut the muflers off.....for the cost of 1 sawzall blade it was worth it

one of those small triangle things

i just bought a 97 v6 mustang as a parts car for my 95 gt. they are both 'verts....id like to take the dash out and swap them. from what ive seen it looks like it should swap right in. any info on anything that is interchangable will help thanks

in a 1991 gt with moroso solid motor mounts and a 670 street avenger would not clear a stock hood...just a good excuse to buy a cowl hood!

car has 153k its a vert runs great! has a bad rearend and the trans lost reverse the body is almost perfect its a shame to part it out but its obd2 and a v6 soooo.... i also have 3 different sets of rims from cobra Rs to stockers all with good rubber everything sold cheap!!!let me know what you...

yea after playin with it i got it the pinion was locked up solid so i couldnt rotate the diff or see the cross pin bolt but couple wacks with the sledge freed her up

i took the 4 bolts out and nothing do 7.5s have c clips? also if anyone needs parts its a 97 v5 5 speed getting parted out