What x-pipe or h-pipe can i use ?

[Ghostly Echo]

Okay i picked up the gt mufflers and tail pipes from Jarred During the meet.

Now what kind of x-pipe or h-pipe can i put on the car so i don't have to wield anything?

As far as i know now the stock gt h-pipe won't fit but i have been told the Bullit's x-pipe will fit i just want to know what other not to expensive options i can go with.

 

[Wicked One]

Have you looked at this?
http://www.americanmuscle.com/pypes-0509-v6-xpipe.html


I will keep looking for answers bro.

 

[Ghostly Echo]

Have you looked at this?
http://www.americanmuscle.com/pypes-0509-v6-xpipe.html


I will keep looking for answers bro.

That looks great i just might get it, I read the directions and it says cut the h-pipe but i have a y-pipe is that a typo?

 

[48prerunner]

Just get an x pipe from pypes about $95 then you can just cut your y pipe out and clamp it in. I used a h pipe for a GT with long tube headers but i welded it in. There is also a y pipe set up from saleen on buysaleen.com You know you dont have to swap the pass side pipe right? its the same as the gt. And you are going to need 2 8mm bolts and a set of exhaust hangers for the driver side. Save the the 2 extra bolts you take off of the v6 muffler. Oh and for now just swap on the single gt take off to you get the x or h pipe about 20 mins work and will sound great.

 

[48prerunner]

http://www.pysales.com/iwwida.pvx?;item?item_no=XFM44 1?comp=ppe
if that link works its the x pipe you want XFM44 2005-08 V6 Mustang Street-Legal X-pipe

oh and a gt h pipe will fita after you cut it. slips right over the cut v6 but you have to weld it. as its bigger than the v6

 

[Ghostly Echo]

Just get an x pipe from pypes about $95 then you can just cut your y pipe out and clamp it in. I used a h pipe for a GT with long tube headers but i welded it in. There is also a y pipe set up from saleen on buysaleen.com You know you dont have to swap the pass side pipe right? its the same as the gt. And you are going to need 2 8mm bolts and a set of exhaust hangers for the driver side. Save the the 2 extra bolts you take off of the v6 muffler. Oh and for now just swap on the single gt take off to you get the x or h pipe about 20 mins work and will sound great.

oh okay i wasnt sure i could put that muffler on my stock pipe i am heading to the garage now to do it

 

[irishpwr46]

you have the whole catback for the other side right?

 

[Ghostly Echo]

you have the whole catback for the other side right?

yes both sides i got the midpipes and mufflers from jarred

 

[48prerunner]

Is it on yet? lol I picked up about 2mpg with agt single and much better sound, going to duals not much difference just looks cooler.