Cams or Long tubes??

[Wicked One]

I am getting ready to pull the trigger on my supercharger, and have enough coin left over for either cams or long tubes/control arms.

What would be a better choice???

Thanks.

 

[BlackStang14]

Long tubes bud... Does not make sense to push more cfms through shit flowing headers by doing cams... Lt headers then cams IMO...

 

[1990_LX]

Both. But if you can ONLY do one...L/Ts.

 

[BlackStang14]

Cams do once and do it right... Custom grind Charger cams with springs...

 

[Wicked One]

That's what I was leaning towards.

Maybe I can swindle some more cash out of the Piggy bank and get them both.

 

[Wicked One]

Going to go with comp cams. But the s/c company recommends the comp 127300 but those are N/A cams. WTF!!!

 

[BlackStang14]

That's what I was leaning towards.

Maybe I can swindle some more cash out of the Piggy bank and get them both.

You have to sell your soul for boost... Believe me you wont regret it...

 

[Wicked One]

Hey joe, do you have the cam tools, cause I am going to probably get them and the L/T's and don't feel like spending $300 on shit I will use once.

The spring compressor and wedge??

 

[BlackStang14]

Going to go with comp cams. But the s/c company recommends the comp 127300 but those are N/A cams. WTF!!!

Comp does custom grind per specific application... I am going with a custom set of cams soon not sure if I am going with comp though...

Greg come out to the mountain tonight...

 

[BlackStang14]

Hey joe, do you have the cam tools, cause I am going to probably get them and the L/T's and don't feel like spending $300 on shit I will use once.

The spring compressor and wedge??

No wedge but I have the spring compressor...

Wedge is not needed have done about plenty of swaps without it...

 

[Wicked One]

I will try. No promises, if so I will see you at the Mobil at 5:30

 

[Wicked One]

Cool, I am going to have to borrow that (for a small fee) of course. Guess I will make a wedge.

 

[BlackStang14]

Cool, I am going to have to borrow that (for a small fee) of course. Guess I will make a wedge.

Small fee can we just put it towards one of the rear plates you have been making...

Well I hope you can make it out... I may shell out that $40 for the entrance fee... lol

 

[Wicked One]

Yeah you cheap bastard!!!


Do you want a rear trunk thing like I have and made for jose?? I will make one this week for you if so. I will talk to you later about it

 

[BlackStang14]

Yeah you cheap bastard!!!


Do you want a rear trunk thing like I have and made for jose?? I will make one this week for you if so. I will talk to you later about it

Lol I'm in the road so yes we shall resume in person lol...

 

[MineralGray02K]

Do them both dude. I went with a custom set of Comps from Modular Power House and don't regret it at all. Long Tubes were one of my first mods that I did though, so if you can put together the scratch for both then more power to you

 

[Pagan]

Go with the cams. I know if I want to get them now I have to have them remove the SC. Don't know which kind of SC you're getting but as long as they're installing it, might as well have them put the cams in before hand so you save on labor later.

 

[Aetos]

Won't it be a lot more annoying to install cams after the S/C is on the car? I would do the cams now because the installation would just become more time consuming later(and more expensive in labor if you don't do your own work)...

 

[needforspeed]

I am getting ready to pull the trigger on my supercharger, and have enough coin left over for either cams or long tubes/control arms.

What would be a better choice???

Thanks.

Do them both!!!

 

[boostmaster21]

i say long tubes but i will say this..if you have to pull your tranny...long tubes suck ass....trust me i have them on the gt and cobra