need sum suspension advice

K

king89LX

Member
#1
#1
Im going with this setup. not sure if it will fit. can anyone give me sum advice?

Car: 89lx

suspension: Full 5 lug conversion from a 95gt. front and rear.
Eibach suspension: sportline springs, swaybars, shocks
tubular A arms
caster camber plates
all polyurethane bushings
cobra R's 17x9 17x10
 
EHA Racing

EHA Racing

Member Plus
#2
#2
The front spindles are a little different so you will need tubular a arms with SN-95 ball joints and SN-95 tie rod ends. The rear axles from an SN-95 will NOT work with a fox length rear diff. They are slightly longer.
 
K

king89LX

Member
#5
#5
well im using the entire rear from a 95. and do i really have to use coil overs?cus i alrready got the springs.I have the tubular A arms but thier for a fox. can i just use sn95 ball joints? already rolled the fenders. and what size tire should i go with. i was gonna do 245 35 17 and 255 40 17
 
TheWhiteFox

TheWhiteFox

Member
#6
#6
king89LX said:
well im using the entire rear from a 95. and do i really have to use coil overs?cus i alrready got the springs.I have the tubular A arms but thier for a fox. can i just use sn95 ball joints? already rolled the fenders. and what size tire should i go with. i was gonna do 245 35 17 and 255 40 17
Click to expand...
do 255/40 and 275/40
 
1QWKVERT

1QWKVERT

Well-Known Member
#8
#8
Most tubular A-arms are designed for coil overs because there is no mount for a coil spring, just the strut/coilover mount.
 
You must log in or register to reply here.