Trans tunnel E brake set up help needed.

[Mike65]

On my 69 Coupe I am converting the E brake to a center trans tunnel set up. I already purchased the handle assembly & I am looking to see if anyone has a Fox body Mustang they are scrapping if you could cut out around the area where the E brake mounts to the tunnel including the bracket welded to the underside of the trans tunnel that the E brake cable runs through. Answer here or PM me with the cost. Thanks, Mike.

 

[fxblflyr]

I made one of those brackets for a rear disc conversion I did on my 84 so I could run the newer style cables. I notched a piece of 1 1/2" angle iron to accept the outer cable retainers, and then only had to cut a slit in the floor of the car, as I welded the angle plate from the top. It worked very well.

 

[Mike65]

I made one of those brackets for a rear disc conversion I did on my 84 so I could run the newer style cables. I notched a piece of 1 1/2" angle iron to accept the outer cable retainers, and then only had to cut a slit in the floor of the car, as I welded the angle plate from the top. It worked very well.

Do you happen to have any pics?.

 

[fxblflyr]

Sorry, I don't. It was pretty start forward though. If you need a better description,just let me know and I will try to describe it in better detail.