New powerplant almost completed!!!!!

Jays04mach1

Jays04mach1

Well-Known Member
#1
#1
I just got the call from the machinist and my engine is almost complete! This has been a slow process because I've been sending him money here and there. The parts list is as follows. Teksid block .020 over, line bored and decked. Kellogg crank, Manley H-beams, Wiseco forged 10.7:1 compression. Napier and gas ported rings, Fel-pro MLS head gaskets, Stock 03-04 mach 1 heads with 98 cobra cams. Melling oil pumpand thats it for now. This engine should be able to handle anything I'll throw at it. The machinist ran the same set up in his mach and was putting a 400 shot to his qute often with no problems:headbang: This should be interesting! Any one looking for ported intakes for the 4 valves let me know. I will put you in touch with him (ROY) He is GREAT! This is one of his mach pulling 10's[YOUTUBE]mo7ocQifIJc&[/YOUTUBE]
 
Jays04mach1

Jays04mach1

Well-Known Member
#3
#3
Wire tech is the company that Roy owns. He did all of the legwork and assembly. Consiquently it was Roy driving the car in the video. I read about his car in one of the mustang mags doing coverage of the shoot out. I had Roy port an intake for me after I heard about him on mach1registry.com and we started chatting about an engine build. 18 months later and here we are!
 
Last edited:
Unrealford

Unrealford

Well-Known Member
#4
#4
Jays04mach1 said:
Wire tech. the company that Roy owns did all of the legwork and assembly. Consiquently it was Roy driving the car in the vid. I read about his car in one of the mustang mags doing coverage of the shoot out. I had Roy port an intake for me and we started chatting about an engine build. 18 months late and here we are!
Click to expand...
wheres he located?
 
Jays04mach1

Jays04mach1

Well-Known Member
#5
#5
Avoca Michigan. He's good friends with Lidio, the owner of alternative auto performance. These two guys are nuts. Roy did a turbo build for a guy that put down 1145hp to the tires not too long ago! lidio was one of the first to put a mach 1 in the 10's with the stock bottom end. It didn't last due to the KB 2.3 he stuffed on it, but it ran 10's:evil:
 
Jays04mach1

Jays04mach1

Well-Known Member
#8
#8
I just want to clarify that he car in the video is NOT mine. I was just showcasing some of Roys work. The car is my friend Roys, I'm not trying to take credit for anything in that vid. I wanted to get that out of the way before someone tries to stretch my pee pee.
 
You must log in or register to reply here.