MIL Elim's

S

Stranger mugs

Active Member
#1
#1
Hey guys,

My baby has straight pipes, my inspection is coming up, if i put in the elims on the two down stream o2 sensors should the car pass?

Also does anyone know where i can get an cheap catted h-pipe to go with my mac LTH's, i need a flange connection.
 
modularmustang

modularmustang

Well-Known Member
#4
#4
the upsteam ones take care of your a/f ratio while your rears only see if your cats are working correctly. You will only need MIL's for the rears. I had striaght pipes with homemade mils pass for as long as I've owned my car.
 
BAzombie

BAzombie

Well-Known Member
#5
#5
Holy shit stranger. How you been Ryan? You gonna make it out this summer?


OP I made the MIL elim's that MineralGray02K linked to back in 2009, haven't had cel light and passed every NYS inspection.
 
S

Stranger mugs

Active Member
#6
#6
BAzombie said:
Holy shit stranger. How you been Ryan? You gonna make it out this summer?


OP I made the MIL elim's that MineralGray02K linked to back in 2009, haven't had cel light and passed every NYS inspection.
Click to expand...
who is ryan?, and making my own seems complicated and may cost too much due to my location
 
BAzombie

BAzombie

Well-Known Member
#7
#7
The stranger is modularmustang. He moved out of state last year.


As far as making the mil's all parts can be found at a Radio Shack. There should be one in NYC right. It was like $7 in parts to make 2 of them and they're fairly easy to make.
 
S

Stranger mugs

Active Member
#8
#8
BAzombie said:
The stranger is modularmustang. He moved out of state last year.


As far as making the mil's all parts can be found at a Radio Shack. There should be one in NYC right. It was like $7 in parts to make 2 of them and they're fairly easy to make.
Click to expand...
hopefully, ill give it a shot because i just saw the price of a set..... or since its $7 ill give you $40 to make me a set and install
 
BAzombie

BAzombie

Well-Known Member
#9
#9
lol.

It'll cost you more then the $40 in gas to drive the 180mi each way for you to get to me.


If I remember correctly my soldering gun was broke when I made mine. I just twisted the wires together and used the board for structure. Afterwards I completely wrapped everything in electrical tape. Just looks like a fat fuseable link coming of my rear O2's.
 
modularmustang

modularmustang

Well-Known Member
#10
#10
BAzombie said:
lol.

It'll cost you more then the $40 in gas to drive the 180mi each way for you to get to me.


If I remember correctly my soldering gun was broke when I made mine. I just twisted the wires together and used the board for structure. Afterwards I completely wrapped everything in electrical tape. Just looks like a fat fuseable link coming of my rear O2's.
Click to expand...
I did the same thing, didn't even use a board, just a lot of electrical tap. works fine even after 3 years. I have an extra set I think at my parents house in NY already made, they are ghetto but they work. Thing is i live in CT now so i coulndt get them for a few weeks if you were interested OP

Also I'll be around random weekends in the summer for the meets and what not. I really want to hit of LVD at some point since I haven't been to the track since the cams and tune. Hopefully I will see some 12's.:headbang:
 
N

newguy

Well-Known Member
#11
#11
stranger-
i would help( i live on dutchess/putnam border) with the making of them if you really wanted to try, as i want some too. another option would be to buy some for about 23 bucks... there is a guy on ebay that ive seen selling his own. i believe hes in pa. and of course does ship them. am muscle sells them, but they are 60 bucks if i remember correctly.
 
You must log in or register to reply here.