94 long tube header....searched threads but came up with nothing!

[aintpersonal]

im swapping out my shorty headers for long tube headers on my 94 stang 5.0l, ive done long tube swaps on old trans ams and camaros, but never on any thing newer then an 1981, anyone have any helpful tips or things to watch out for?

 

[fordgasm]

hell to install but good improvement unbolt mounts jack up one side as much as possible

 

[MineralGray02K]

There's a write up in the write up section but its for a 4.6. Check it out, maybe it will help: http://newyorkmustangs.com/forums/forumdisplay.php?f=107

 

[dsblk93gt]

I have only installed BBK long tubes with a friend on his 94 GT and they fit/looked awesome. Get the ceramic ones it is worth the $$$. Whats the budget?

I think we unhooked the steering shaft to make it easier but other than that it was cake to install them.

 

[1BIGMOFO]

I installed ceramic long tubes on my 94 and i did it while installing the new engine. I dont think its possible to fit them without at least taking out the motor mount bolts and jacking up the engine... If there is anything else I can do to help let me know...

 

[dsblk93gt]

I installed ceramic long tubes on my 94 and i did it while installing the new engine. I dont think its possible to fit them without at least taking out the motor mount bolts and jacking up the engine... If there is anything else I can do to help let me know...

What brand? I know the BBK you don't have to. We went through the bottom to install them. No emissions junk on the car either though.

 

[aintpersonal]

im going to attempt to do it this weekend if its nice outside. ill take some pics of the install and let you guys know how it goes. thanks for the help.

 

[1BIGMOFO]

What brand? I know the BBK you don't have to. We went through the bottom to install them. No emissions junk on the car either though.

I have a '94 w/ MAC ceramic long tubes w/ a mac ceramic prochamber. The only problem i had finding them is because my car is an AODE and MAC is the only company that makes them to fit.

ITS CLOSE!!!

I can take pics if you want to see.