Up for sale is an 88' GT Fox Body Roller with a 306 long block. The vehicle was purchased a few years ago with a clean PA title as a project and I just got too busy to get started on it. Most of the parts that were purchased have been sold off and this is whats left. Parts can be sold with car or separate. Hood shown in pictures was sold previously.
• Car - $800 obo
• Cervini Saleen style wing Used - $200
• Boss Cobra R Hood New (TDR-87) - $350
• Trick Flow 289-351 Balancer New (TFS-19006) - $125
• Hurst Shifter Currently Installed (HUU-3915033) - $175
• Kirkey 17" Intermediate Seat Currently Installed (KIR-47700) - $200
• Kirkey Grey Seat Cover still in bag (47717) - $300
• MOMO Steering Wheel Hub Adapter Currently Installed (4525) - $60
• Assault Racing Fabricated Valve Covers Currently Installed - $75
• Eibach Sway Bar Kit New (3510.320) - $250
• Eibach Pro Kit Springs New (3510.140) - $160
• Edelbrock RPM Air Gap 302 Intake Currently Installed (7521) - $275
• Canfield 20450 Cylinder Heads 192/58cc Used and Installed - $1000
• Comp Cams 1.6 Roller Rockers Used - $150
• Comp Cams Pushrods New Installed (CCA-7938-16) - $100
These pushrods are for use with the flat tappet lifters currently in motor. Have TFS pushrods for Roller Lifters.
• Short Block Details – Speed Pro Hypereutectic pistons, stock bottom end, Cylinders bored for 4.030 piston, Flat Tappet B Cam (Unconfirmed), newer water pump, newer radiator, MSD cap with ford racing wires
Asking $4000 with everything included.
Any questions are welcome
• Car - $800 obo
• Cervini Saleen style wing Used - $200
• Boss Cobra R Hood New (TDR-87) - $350
• Trick Flow 289-351 Balancer New (TFS-19006) - $125
• Hurst Shifter Currently Installed (HUU-3915033) - $175
• Kirkey 17" Intermediate Seat Currently Installed (KIR-47700) - $200
• Kirkey Grey Seat Cover still in bag (47717) - $300
• MOMO Steering Wheel Hub Adapter Currently Installed (4525) - $60
• Assault Racing Fabricated Valve Covers Currently Installed - $75
• Eibach Sway Bar Kit New (3510.320) - $250
• Eibach Pro Kit Springs New (3510.140) - $160
• Edelbrock RPM Air Gap 302 Intake Currently Installed (7521) - $275
• Canfield 20450 Cylinder Heads 192/58cc Used and Installed - $1000
• Comp Cams 1.6 Roller Rockers Used - $150
• Comp Cams Pushrods New Installed (CCA-7938-16) - $100
These pushrods are for use with the flat tappet lifters currently in motor. Have TFS pushrods for Roller Lifters.
• Short Block Details – Speed Pro Hypereutectic pistons, stock bottom end, Cylinders bored for 4.030 piston, Flat Tappet B Cam (Unconfirmed), newer water pump, newer radiator, MSD cap with ford racing wires
Asking $4000 with everything included.
Any questions are welcome
Attachments
-
1,004.1 KB Views: 569
-
996.3 KB Views: 573
-
996.6 KB Views: 520
-
1.7 MB Views: 649
-
749.7 KB Views: 338
-
1.7 MB Views: 527
-
852 KB Views: 340