Alright guys i am going to do a quick update on the build then let you kno whats happening.
Twin 405's Compliments of Jeremy:
The Drain Line was hitting the frame so i decided to throw a heat sleeve on it:
Line running along the frame to the front is the AC Line ^
I bought two each of these *Overflow and Catch can* then fabricated the bracket to make it work symmetrical in the car.
On the car:
Vacum Distribution, Fuel Pressure Sensor, Boost Pressure Sensor, Eboost2 Solenoid mounting:
Showin Each the Fender wells and how we tucked everything:
The pretty much finished setup:
Start up had a few issues being the 405s soooo "huge" but with a 30% leaner map it started up and idled.
[YOUTUBE]6J046_eRdGU[/YOUTUBE]
Pulled her down off the lift and start putting some miles on her.
Air condenser looks like shit but whatever:
[YOUTUBE]25kGpD5xAX0[/YOUTUBE]
SO HARD TO STAY OUT OF BOOST
Drained the oil after 60miles and this is all i got:
The last up date before the accident...