Search results

Ok So I'm going to be doing a 5 lug swap soon. So i ordered 2 rims for the rear. 1 to see how they look. 2 need something for the 5 lug swap. So instead of spending the 400+ a rim for the Welds which I really like. I got the knock offs for now to see how they will look on the car. So I should...

AOD LOCKUP vs NON-LOCKUP Torque Converters NON-LOCKUP converter means transmission NEVER "locks up" with engine, which means the converter is always slipping, at any speed, rpm, throttle position...This also means more heat so make sure you have the biggest "stacked plate type" cooler you can...

You are correct. The porblem they had was not boxing him in after any of the spins. The spin when it hit the guard rail there was a cruiser behind the car to stop him from going into reverse. I have seen pit maneuvers done where the car being pitted went right into another car driving in the...

What do you mean stage 3 cam. Why are companies doing this now. What are the specs on the cam, who made it also, and we need a lot more info. There is no way anyone can give you correct info with the info on what you wrote above. Size of motor 306, 347, 331 ect... Also need the setup on it...

I can gave you a few places that make t-5 that handel a lot of power. It looks like the 3650 won't fit a fox anyway because of there is no bellhousing. So I would go with a tremec 3550 or A tko 500, A tko 600. G-force makes a good t-5 G-Force Street 5-Speed Transmission G-Force Street...

I just found more info also "No one that I know of makes a bellhousing to mate the 3650 and a 5.0 together. If that wasn't an issue, it still wouldn't fit because of the shifter location, crossmember mount location, and length. You'd be better off to get a tranny made for a Fox (if this is for...

Why do you want to get a 3650 for your car. From wourking with Modular motors and 5.0 motors. The bell housing mount different ways. THE 3650 bell housing mounts from the inside with 10 or 12 bolts. A standered T-5, Tremec 3550 The bell mounts to the trans from the outside with 4 bolts...

It wasn't the Mustang Source either. I don't have that site saved as one of my news places. It was either motortrend.com and automobilemag.com. But it now seems as the pics have change and they both have a Gold color mustang now. But if you click on the pics amd go to properties it comes up with...

http://www.autoblog.com/2010/01/12/detroit-2010-a-closer-look-at-the-mustangs-5-0l-v8/ While Ford might not be pulling out all the stops here in Detroit to promote its updated Mustang like it did for the 2010 model year, the 2011 model's improvements are just as significant, if not more. The...

Link to the site does not come up with a site. Are they still around. I would like to see what they have.

Re: Carlise all ford nationals? I should be going down there with my newley painted mustang.

I wish I was. I found it on one of the sites.

I know that an 89 140 speedo will work on an 87 or 88 mustang. I use an 89 for my 87 and it pluged right in. I didn't have to do anything special to make it work.

The 5.0L Ford Mustang GT marked its official return today at the Detroit auto show. And the engine is a true 5.0L, unlike the 4.9L V-8 under hood of the Mustang in the early-nineties. But minor technicalities aside, the mill makes 412-hp and 390 lb-ft of torque, dropping the power deficit...

Can save yourself sometime and go with some of these Aluminum panels put them in and paint over http://www.scottrodfab.com/products.html

As far as I know all the 89=93 mustang gagues were 140 and black. I think the white overlay is the only way to get it that way. What didn't work on the cluster you bought?

The tire is really wide for that car. It was to wide. That I went down to a 28x10 tire and it fit better. I just messured from were the wheel mounts to, To the lip of the rim and it is around 4.5 to 5 inch back spacing. It still has the tire on it. So a little hard to tell. And the width seem to...

I just took some of the highlights you all can read the rest of the article http://www.thefordstory.com/our-plan-progress/ford-tops-in-fuel-economy-gains/ No automaker has posted a larger fleet-wide gain in fuel economy in the past five years. According to the Environmental Protection...

They do fit without Mini tubes well I don't know about 16 inch ones. But I ran a 28x12.5x15s on my GT I had to trim some of the skirt lips where it rubbed. Also rolled the fender lips.

I have an HP stage 2 66mm singal kit on my car. I love the system, Works great and has been on the car for 5 or 6 years now. I've owned the car for 3 of those years also. Here is the kit in action 13psi.