New York Mustangs
zoomie
ok, what is it youd like to know?
Johnarmymp552
Do you have anything done with the heads? I see you are doing a lot to get more air and fuel in and out, but it will still be restricted with stock heads- I would port the heads, or get a set of aluminum heads- 75mm and 30lb inj. may be a bit much for that combo- What is your question?
zoomie
What exactly are you trying to make your car do?
Johnarmymp552
Your cam is rated for 2200-5500 rpm, .468 lift with 1.6 ratio rocker arms (1.7 ratio will probably be ok, but just double check piston to valve clearance), Intake is 1500-6500rpm- so they are a good match- springs are a must, make sure you upgrade your pushrods as well (I learned the hard way on that before). The intake recommends it can fit up to a 75mm- I would still shoot for a 70mm tb and 24lb injectors for your set up, fuel pressure at 40psi- 75mm tb and 30lb inj are too big, especially with stock heads. You would be surprised at how much horsepower 24lb injectors and a 70mm Cobra throttle body can support. Definately upgrade the fuel pump, and I would port match the heads to the intake Otherwise good set up, definately fun on the street.
zoomie
and what is your current setup big phil?