Vortech supercharger kit...which one should i get?

88modstang

88modstang

Member
#1
#1
88 mustang gt
Looking to but a vortech supercharger kit for my car.This is a 90% daily driver with an occasional trip to the track for fun.

These are my mods:

The bottom end im assuming is stock although i do think it has a slightly larger cam.
mass air conversion
iron heads with screw in studs,crower enduro roller rockers,isky guide plates
Trickflow intake
bbk equal length headers
bbk adj fuel reg
190 lph pump
70mm bbk throttle body
bbk cold air intake
24# injectors
cobra x3z computer with matching mass air meter 70mm
Underdrive pullies
electric fan
msd 6al,msd coil
Tremec 3550hd trans
aluminum driveshaft
3:73 gears
bbk subframe connectors
bbk lowering springs

Do i buy a kit or can i piece something together using some parts i already have?
 
AdirondackFox08

AdirondackFox08

Member Plus
#2
#2
Do you have upgraded lower control arms? A s/c kit would come with pretty much everything you would need. The fuel pump might be a little small, it would depend on how much power you would make with it, and the injectors would need to be bigger. Vortech has the V1, V2, and V3 superchargers. Iirc, the V3 is the most efficient and the V1 is the loudest, and the oldest of them. What iron heads do you have, the E7s? It depends on how much power you want to make, if you want to do a s/c and pulley it until you make what you want, or upgrade the heads and cam, then do the s/c.
 
You must log in or register to reply here.