Heavily modded 1982 gt for sale. Dont really have the time for it.
76k on body, 11k on engine
Engine:
.030 over 302
Keith black 10:1 pistons
Edelbrock performer heads
1.72 roller rockers
Anderson cam
Edelbrock rpm intake
Holley 650 ultra carb
1" carb spacer
Sve solid mounts
Cooling:
Sve 3 core aluminum radiator
Twin 12" electric fans
Ignition:
Msd 6al box
Accel super coil
Perfermance distributors 10mm plug wires
Msd cap/rotor
Exhaust:
Summit long tubes
Flowtech h pipe
Mac pro dumps
Drivetrain:
T5 trans
New oem clutch
pro 5.0 shifter
upr pro billit ahift lever
Frpp aluminum driveshaft
8.8 rear with frpp 4.10s
Moroso solid mount
Front suspenion:
Qa1 k member
Lakewood 90/10 struts
Upr 14" 150lb coilovers
Maximum motorsport control arms
Sve caster/camber plates
Rear suspension:
Stock shocks/springs
Upr pro series upper/lower control arms
Upr anti roll bar (not installed)
Misc:
Manual steering rack
2 centerline wheels with mickey thompson et street radials (approx 100 street miles, 0 track time)
4 american racing wheels with nearly new cooper tires
Subframe connectors - bolt in
Driveshaft loop (not installed)
Battery mounted in rear
Holley electric fuel pump
Sve torque box reinforcements (not installed)
Car does need some bodywork. Drivers door dented and rusted but i have another door that only needs to be painted. Has aftermarket sunroof that leaks. Currently on road and inspected.
Bought a 351 that will go with the car. Came out of an 88 f350, will need complete overhaul.
Also have spare 8.8 that will go with car. It is completely stock from an 89 gt
Most of the listed parts have less than 1500 miles on them. Can show receipts for the bulk of the parts (some were already on the car, some purchased used)
Will not part out. $5500 b/o trade for bass boat
76k on body, 11k on engine
Engine:
.030 over 302
Keith black 10:1 pistons
Edelbrock performer heads
1.72 roller rockers
Anderson cam
Edelbrock rpm intake
Holley 650 ultra carb
1" carb spacer
Sve solid mounts
Cooling:
Sve 3 core aluminum radiator
Twin 12" electric fans
Ignition:
Msd 6al box
Accel super coil
Perfermance distributors 10mm plug wires
Msd cap/rotor
Exhaust:
Summit long tubes
Flowtech h pipe
Mac pro dumps
Drivetrain:
T5 trans
New oem clutch
pro 5.0 shifter
upr pro billit ahift lever
Frpp aluminum driveshaft
8.8 rear with frpp 4.10s
Moroso solid mount
Front suspenion:
Qa1 k member
Lakewood 90/10 struts
Upr 14" 150lb coilovers
Maximum motorsport control arms
Sve caster/camber plates
Rear suspension:
Stock shocks/springs
Upr pro series upper/lower control arms
Upr anti roll bar (not installed)
Misc:
Manual steering rack
2 centerline wheels with mickey thompson et street radials (approx 100 street miles, 0 track time)
4 american racing wheels with nearly new cooper tires
Subframe connectors - bolt in
Driveshaft loop (not installed)
Battery mounted in rear
Holley electric fuel pump
Sve torque box reinforcements (not installed)
Car does need some bodywork. Drivers door dented and rusted but i have another door that only needs to be painted. Has aftermarket sunroof that leaks. Currently on road and inspected.
Bought a 351 that will go with the car. Came out of an 88 f350, will need complete overhaul.
Also have spare 8.8 that will go with car. It is completely stock from an 89 gt
Most of the listed parts have less than 1500 miles on them. Can show receipts for the bulk of the parts (some were already on the car, some purchased used)
Will not part out. $5500 b/o trade for bass boat
Attachments
Last edited:
