New York Mustang Club



Prev | Next |
Picture 3 of 243 from Album 69 Mustang Coupe.
1/12/18 I drilled a 7/8" hole in the lower part of the l/s front inner fender panel & ran the harness back into the engine compartment & through the hole in the lower l/s of the radiator support out to the front. I also ran the wire for the temp sensor from the cooling fan relays back to meet up with the engine harness.
1/12/18 I drilled a 7/8" hole in the lower part of the l/s front inner fender panel & ran the harness back into the engine compartment & through the hole in the lower l/s of the radiator support out to the front. I also ran the wire for the temp sensor from the cooling fan relays back to meet up with the engine harness.
Picture Added 4 Days Ago
Added by Mike65