Kenne Bell blower,kooks headers,tr-6060 6 speed

[nycmikie1]

Selling off my parts with under 1000 miles on all parts this is on my 2007 mustang GT 4.6 3valve
Kenne Bell 2.6 H blower water-to-air intercooled,sct X3 tuner,8 rib set up with Thumper belt tensioner and idlers and set up for 10 pounds of boost parts alone cost me $7000

D&D PERFORMANCE conversion tremec tr-6060 6 speed with super snake shifter and cross member cost me $3400

Kooks long tube s/s headers with Kooks X pipe and there high flow cats and aluminum coated cost me $1700

Livernois 298 cu in short block BRAND NEW in the plastic with upgraded coated pistons and double keyed crank,canton aluminum pan and windage tray,innovators west 10%o verdriven 8 rib double keyed,ARP head studs this is all BRAND NEW cost me $6800

Please make reasonable offers only that is the only way these parts will be sold all prices is what the parts cost without any shipping. Thanks

 

[bobbyoooo]

dam man why you gettin rid of all the goodies, n goodluck wit the sale

 

[nycmikie1]

Kenne Bell 2.6H BLOWER is still available!!!!!!!!!!

 

[bruiser937]

Livernois 298 cu in short block BRAND NEW in the plastic with upgraded coated pistons and double keyed crank,canton aluminum pan and windage tray,innovators west 10%o verdriven 8 rib double keyed,ARP head studs this is all BRAND NEW cost me $6800
D&D PERFORMANCE conversion tremec tr-6060 6 speed with super snake shifter and cross member cost me $3400

What do you want for the tranny?
What do you want for the block?
I really wanted that KB.

 

[nycmikie1]

Livernois 298 cu in short block BRAND NEW in the plastic with upgraded coated pistons and double keyed crank,canton aluminum pan and windage tray,innovators west 10%o verdriven 8 rib double keyed,ARP head studs this is all BRAND NEW cost me $6800
D&D PERFORMANCE conversion tremec tr-6060 6 speed with super snake shifter and cross member cost me $3400

What do you want for the tranny?
What do you want for the block?
I really wanted that KB.

let me see with the blower the guy said he wants and waiting for the money if your serious let me know i will get back to you if he bails out.
The Livernois shorty with the canton oil pan, arp studs you will have to use the innovate west dampner since its doubled keyed as I said I paid $6800 with out shipping pick it up cash for a quick deal $5800
Tremec with supersnake shifter and crossmember $2700
and I have alot of other bmr suspension parts drop springs and boxed LCA ,Granetelli motorsports brand new coil packs

 

[jared88]

are you going to sell the SCT separate?

 

[nycmikie1]

it will go with the KB KIT I want who ever buys my kit to be totally happy and you can make all the changes to the tune and one of the most important things is the 8 rib set up and my Thumper tensioner no problem with belts at all

 

[bruiser937]

First I'm really interested in the KB kit.I was going to buy one next month. I'm sure I can swing it so let me know. Second I was going to buy a short block next year once again maybe I can swing and the same for the tranny. When you let me know if the Kb is available I'll make up my mind on all the rest.(just a quick call to Dad for some cash)

 

[nycmikie1]

I tried to PM you but seems like it is turned off give me a call on my cell Ray Pm me for number

First I'm really interested in the KB kit.I was going to buy one next month. I'm sure I can swing it so let me know. Second I was going to buy a short block next year once again maybe I can swing and the same for the tranny. When you let me know if the Kb is available I'll make up my mind on all the rest.(just a quick call to Dad for some cash)

 

[nycmikie1]

Hey Ray
Just waiting on what you want to do

 

[MikeyBlacks]

Mikey, how much r u asking for the headers ?

 

[bruiser937]

I'm sorry Mike I'm out of the running for all your great parts.I can have them but I will lose my Girlfriend and life.(She wants that damn engagement ring) She did make sense .Do I want a race car or a show cruiser car. Sorry once again. I have my tail between my legs right know.

 

[nycmikie1]

No Problem Ray
Good Luck

I'm sorry Mike I'm out of the running for all your great parts.I can have them but I will lose my Girlfriend and life.(She wants that damn engagement ring) She did make sense .Do I want a race car or a show cruiser car. Sorry once again. I have my tail between my legs right know.

 

[nycmikie1]

there where $1400 plus $300 for the coating so once I sell the blower I will take $1100
that work for you?

 

[boostingwild]

how much for the springs? what other suspension stuff do you have for sale?

pics?

 

[nycmikie1]

I have BMR boxed rear LCA, front BMR tubular LCA,BMR 5 speed stick front driveshaft loop,rear TOKICO d-spec shocks,brand new ford mustang upper strut mounts

how much for the springs? what other suspension stuff do you have for sale?

pics?

 

[nycmikie1]

Complete Kenne Bell 2.6H is still available

 

[nycmikie1]

Hey Ray
Its to bad just so you know you can run this system on your stock engine with stock gears and stock exhaust and still be making in the 440 H-P at the rear wheels you really don't need headers and gears and after time you will need a better clutch but that's according to how you drive it that will make it last all your other parts will be fine your Trans and rear are totally strong enough and when your driving on the highway you will see 20 mpg and it fits under your stock hood so it's a PLUS PLUS all around Headers are not a big gain on a blower motor at this H-P level maybe 10-15 H-P and just so you know the car still drives just the same as it does now unless you drop the hammer then it's like having a gt 500 and you do not need frame connectors with street tires even if you have drag radials you can walk the car out of the hole these cars and built way stronger then older Mustangs

I'm sorry Mike I'm out of the running for all your great parts.I can have them but I will lose my Girlfriend and life.(She wants that damn engagement ring) She did make sense .Do I want a race car or a show cruiser car. Sorry once again. I have my tail between my legs right know.

 

[bruiser937]

Mike quick question, is the blower polished and how much did you want for it?

 

[nycmikie1]

No Ray it is not and you do NOT want polished as it holds more heat $5700 you get everything you need right down to my SCTX3 tuner and 8 rib pulleys and Thumper tensioner there is $7000 worth here and you can watch me take it apart if you like so you can install it yourself but if you want to hear it run tomorrow will be the last day as the Exhaust is sold after you told me you can't go for everything and again all has less then 1000 miles you will just need gauges boost and fuel pressure