04 Black G35 extra heavy clear coat correction
I used my Flex Rotary for this one.
3M Perfect-It 3000 Extra Cut Rubbing Compound
with yellow 6.5" & 4.0" pads
Meguiars M205 Ultra Finishing Polish
with blue 6.5' & 4.0" pads
Collinite 476S Super Double Coat Paste Wax
50/50 shots after correction
rotary machine compounding twice then rotary machine polished twice.
the swirls & scratches were really deep. i wasn't putting down the machine untill the clear was absoultely perfect with the exception of a few stone chips here & there.
there is no wax on the car yet.
1 front bumper
2 grille
3 tight curves after correction. front bumper under the headlight
4 drivers fender
5
6
7
8
9
10
11 small area above the drivers side quarter panel glass
drivers side quarter panel
12
trunk & rear bumper
13
14
15
16
hood
17
the left side still needs a little more compound.
18
hmm...now that looks better.
19
20 perfect! just a few stone chips here & there.
final pics after Collinite 476S Super Double Coat Paste Wax
20
21
22
23
24 my favorite shot
25 by bye car. on its way back home to Brooklyn (with CT plates lol)
I met up with Felix around 10:30pm Monday night. he had an early tueseday flight to vegas & was to return early Thursday morning. i put in some extra late night hours & had the car ready for pick up around 12pm noon on thursday.
yes, i do a lot of infinitis just in case anyone didn't notice =)
here is a little review Felix posted on his forum.
thanks for taking the time out to read the writeup from start to end. if you have any questions or comments about the work that was done post it up.
my back & wrists were killing me from this car!
I used my Flex Rotary for this one.
3M Perfect-It 3000 Extra Cut Rubbing Compound
with yellow 6.5" & 4.0" pads
Meguiars M205 Ultra Finishing Polish
with blue 6.5' & 4.0" pads
Collinite 476S Super Double Coat Paste Wax
50/50 shots after correction
rotary machine compounding twice then rotary machine polished twice.
the swirls & scratches were really deep. i wasn't putting down the machine untill the clear was absoultely perfect with the exception of a few stone chips here & there.
there is no wax on the car yet.
1 front bumper
2 grille
3 tight curves after correction. front bumper under the headlight
4 drivers fender
5
6
7
8
9
10
11 small area above the drivers side quarter panel glass
drivers side quarter panel
12
trunk & rear bumper
13
14
15
16
hood
17
the left side still needs a little more compound.
18
hmm...now that looks better.
19
20 perfect! just a few stone chips here & there.
final pics after Collinite 476S Super Double Coat Paste Wax
20
21
22
23
24 my favorite shot
25 by bye car. on its way back home to Brooklyn (with CT plates lol)
I met up with Felix around 10:30pm Monday night. he had an early tueseday flight to vegas & was to return early Thursday morning. i put in some extra late night hours & had the car ready for pick up around 12pm noon on thursday.
yes, i do a lot of infinitis just in case anyone didn't notice =)
here is a little review Felix posted on his forum.
thanks for taking the time out to read the writeup from start to end. if you have any questions or comments about the work that was done post it up.
my back & wrists were killing me from this car!
Last edited:
