Edelbrock Performer RPM airgap intake.
Holley 750 vac secondary carb.
Rebuilt Duraspark distributor with steel gear (roller cam).
Motorsports oil pan, pickup, dipstick and stud.
Urethane engine mounts.
BBK 1-3/4" long tube headers, H-pipe, flow tubes and Borlas.
Retro roller camshaft, lifters, dogbones and spider to run roller cam in non-roller block.
351w block, non-roller (needs to be machined)
I'll sell it all complete for $1100
I also have a JPT rollerized pan fill C4 with reverse manual valve body that has just been freshened, 0-miles. Trans even has roller tailshaft bearing. 10" 3000 stall converter, bellhousing, dipstick, Urethane trans mount, transcooler, B&M Prostick and choice of 28oz or 50oz flywheel. $800
Megabite lower control arms with brackets, Southside solid uppers and Lakewood 50/50 shocks $230.
Not willing to break up the exhaust, rear or trans.
Holley 750 vac secondary carb.
Rebuilt Duraspark distributor with steel gear (roller cam).
Motorsports oil pan, pickup, dipstick and stud.
Urethane engine mounts.
BBK 1-3/4" long tube headers, H-pipe, flow tubes and Borlas.
Retro roller camshaft, lifters, dogbones and spider to run roller cam in non-roller block.
351w block, non-roller (needs to be machined)
I'll sell it all complete for $1100
I also have a JPT rollerized pan fill C4 with reverse manual valve body that has just been freshened, 0-miles. Trans even has roller tailshaft bearing. 10" 3000 stall converter, bellhousing, dipstick, Urethane trans mount, transcooler, B&M Prostick and choice of 28oz or 50oz flywheel. $800
Megabite lower control arms with brackets, Southside solid uppers and Lakewood 50/50 shocks $230.
Not willing to break up the exhaust, rear or trans.
Last edited: